Re: Luckytech P5MVP3 Rev 1.3, slow boot and won't detect OS on HDD

Posted on 2021-03-31, 10:04

by

by PcBytes

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Hotflashed it with the Rev D BIOS. I can now boot CDROM, but HDDs still have the same issue where they get stuck after detection. marxveix - the only controller I have on hand is some Goldstar (I think) ISA controller from a 486, and I'm not sure if that even works with newer boards.

---

Re: Luckytech P5MVP3 Rev 1.3, slow boot and won't detect OS on HDD

Posted on 2021-03-31, 09:18

by

by PcBytes

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

CD Boot apparently doesn't work either - it will show the drive reading (used a 2K SP4 disc for that) but will still stay at the Boot from ATAPI CDROM screen. I'd try floppy boot... if any of my floppy disks would work in the first place.

---

Luckytech P5MVP3 Rev 1.3, slow boot and won't detect OS on HDD

Posted on 2021-03-31, 08:52

by

by PcBytes

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Just bought an retro kit comprised of a Luckytech P5MVP3 mobo w/AMD K6-2 500MHz, SB Live 5.1, 64MB of RAM (in reality a PC133 128MB stick that gets detected as half its capacity), a 40GB WD HDD (unused for now until I can get it going enough to flash a 64 or 128GB BIOS on it) and (strangely) a SATA …

---

Re: Bought these (retro) hardware today

Posted on 2020-12-09, 18:52

by

by PcBytes

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

That Bluestorm II looks pretty good, but I strongly recommend recapping it. I've seen a lot of these units blow up in horrific ways due to the caps (mainly normal gray units but some Bluestorm IIs were affected as well). I bought one a few years ago and I recapped it straight away. Mine's powering a …

---

Re: Help me find what mother board I had back in 1999.

Posted on 2020-12-05, 21:26

by

by PcBytes

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

2 ISA, lots of PCI and AGP narrowed down the search to Soyo K7AIA, Gigabyte 7IXE and the MSI MS-6167. I may be wrong, but wasn't 3x ISA a Intel 440BX thing mostly?

---

Re: Bought these (retro) hardware today

Posted on 2020-11-05, 10:34

by

by PcBytes

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Bancho wrote on 2020-09-27, 16:58: A Supermicro PIIIDR3! Intel 840 Dual Slot 1 Motherboard. Even has some RIMM's populated. This takes 133fsb CPU's. This will deff […] Show full quote A Supermicro PIIIDR3! Intel 840 Dual Slot 1 Motherboard. Even has some RIMM's populated. This takes 133fsb CPU's. …

---

Re: Hello, World! :D - Robert B's PC builds - oogle away freely :)

Posted on 2020-10-24, 18:42

by

by PcBytes

in Marvin \ System Specs

in Marvin \ System Specs

That laser looks strikingly similar to the classic PS1/PSone lasers. Filename webma$641128.jpg File size 36.76 KiB Views 1437 views

---

Re: Bought these (retro) hardware today

Posted on 2020-10-18, 17:10

by

by PcBytes

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Scored some free gems: - Office 97 Small Business Edition (DE) - Windows 95C (DE) - AOL Diamond (DE) - EPSON Creative Design Pack (Multilanguage, but the sticker on it is in Deutsch) - Corel Draw 7 OEM (Multi) - Aztech SC16-3D + ATI Rage Pro Turbo Driver CDs (EN) - CD-R w/ bunch of pictures from the …

---

Re: Bought these (retro) hardware today

Posted on 2020-08-23, 16:58

by

by PcBytes

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Got myself a 3D Blaster Anihilator 2 32MB - Geforce 2 GTS for $1.21. Filename 20200823_191106.jpg File size 1.41 MiB Views 1875 views Had to bend the I/O bracket back and replace the long ago dead HSF.

---

Re: I recently found this hardware, AKA the Dumpster find thread.

Posted on 2020-08-22, 10:24

by

by PcBytes

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Picked up a whole bunch of crappy PSUs yesterday for free. The "JNC Vargáné és Tsa. BT." models have a significant part in hungarian computing history, these power supplies ruined thousands of computers in the late 90's and early 2000s. Nobody knew why it was necessary for a hungarian company to …

---

Re: A "fancy" Athlon XP build

Posted on 2020-07-24, 18:45

by

by PcBytes

in Marvin \ System Specs

in Marvin \ System Specs

Thanks. The POST code reader has a bad segment (only one tho) so codes may appear a bit funny, but at least it's easy to figure out the codes. I do have a EP-8RDA3I that I could harvest the POST code reader from and solder to the EP-8RDA6I+ Pro, but it's going to take some good hours to do that. …

---

Re: Your favorite retro socket/platform

Posted on 2020-07-24, 10:46

by

by PcBytes

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Socket 1, Socket 3, Socket 7, Slot 1, Slot A, Socket 370, 462, and 478.

---

A "fancy" Athlon XP build

Posted on 2020-07-21, 11:47

by

by PcBytes

in Marvin \ System Specs

in Marvin \ System Specs

I've acquired this build through a trade and figured I'd upgrade it a lil' bit. First, some photos: 20200721_141851.jpg The front of the PC. It originally had some HTPC-styled front panel that was in bad shape. I saved the buttons from that FP, the bay covers, as well as the USB board, then trashed …

---

Re: TI486SLC Build Log

Posted on 2020-07-17, 19:35

by

by PcBytes

in Marvin \ System Specs

in Marvin \ System Specs

That PSU is a rebranded FSP (Fortron-Source Power) unit so you're safe.

---

Re: Shuttle HOT-327, keyboard still not working after patching most traces.

Posted on 2020-07-17, 07:40

by

by PcBytes

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

I checked continuity between all points and all check fine. The burned stuff is flux, but I'll do try and clean, if that could be the main issue that's causing this. As for wires, I used mostly laptop speaker wires, as this is all I had on hand. I think I do have some ASUS IDE cable I cut up eons …

---

Shuttle HOT-327, keyboard still not working after patching most traces.

Posted on 2020-07-17, 07:08

by

by PcBytes

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

As the title mentions, I have a Shuttle HOT-327 that no matter how much I reconnected most of the KB traces, it will still complain about no keyboard (KB error). The KB leds DO flash when I flick the switch on. Any ideas what to do? I can tell the KB controller works (else I wouldn't get any leds …

---

Re: Diagnosing and fixing old AMD386DX 40 MHz boads

Posted on 2020-07-15, 08:38

by

by PcBytes

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

At least on mine, the RAM count goes pretty fast (~2 or 3 seconds?) before throwing the keyboard error. (not sure if it's the KB chip being bad, or I didn't trace my wires correctly.)

---

Re: What retro activity did you get up to today?

Posted on 2020-07-14, 07:28

by

by PcBytes

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

amadeus777999 wrote on 2020-07-14, 07:09: Tested an un supported AMD K62 in an older socket7 board and got a nice string. IIRC my MSI MS-5146 also showed this with a K6-2, though it was one of the later ones. (400 or 450 I think)

---

Re: PCPartner Socket 7 epic design fail

Posted on 2020-07-12, 17:26

by

by PcBytes

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

Thought I post an update. So, I managed to bend the clip and it works well. No protection tape needed, but it couldn't harm I guess. It's also not possible to orient the heatsink the other way around, then the heatsink "wobbles" and, then the clip would overhang the memory slots. This solution …

---

Re: Retro builds with modern conveniences

Posted on 2020-07-11, 14:27

by

by PcBytes

in Marvin \ General Old Hardware

in Marvin \ General Old Hardware

- a dual P3-933 system with U160 SCSI and other period-correct hardware including two Thermaltake Golden Orb HSFs but with a multi-card reader on the front. Oh and all of that in a 2005-era transparant acrylic case :P I have a Voodoo 3 3000 build w/ a P3-650 (slot1, SL3KV) that resides in a 2004- …

---