Re: K6-2+/III+ slowdown issues on ALi Aladdin V
Posted on 2015-10-19, 12:41
I have a voodoo 3 2000 pci,if u want,i could try in the weekend,to oc it to 3000 speed and run the tests see if there is any difference.
Re: K6-2+/III+ slowdown issues on ALi Aladdin V
Posted on 2015-10-19, 11:23
philscomputerlab wrote: Is this disabled by loading the BIOS defaults? Might check my GA-5AX with a V3 and check it out... I think it's enabled by loading bios defaults,at least on my board,becouse i don't remeber enabling it.
Re: Do you leave empty slots between cards?
Posted on 2015-10-18, 06:06
I usually put the soundcard on the last isa or pci slot, in order to reduce interference from rest of components inside the case,I remember reading an article back in a magazine back in the 90.
Re: K6-2+/III+ slowdown issues on ALi Aladdin V
Posted on 2015-10-17, 18:22
I'm using: Ali integrated driver vers 1.091. Standard voodoo 3 drivers vers. 1.07.00(the last official,not beta,drivers for the v3) + 3dfx tool(for disable-ing vsync) Montego A3Extreme 1187 driver for the sound card. Except nusb to be able to use usb sticks,i don't have installed any other kind of …
Re: K6-2+/III+ slowdown issues on ALi Aladdin V
Posted on 2015-10-17, 10:37
Shogo: 640x480 - 57.224 fps 800x600- 56.074 fps 1024x768- 47.829 fps Unreal gold: 640x480 - 55.424 fps 800x600 - 53.021 fps 1024x768 - 47.064 fps Incoming: 640x480 - 75.04 fps 800x600 - 76.37 fps 1024x768 - 70.69 fps Mdk 2:640x480- 37.605 fps 800x600-38.014 fps 1024x768-37.31 fps I retested Dehtkarz …
Re: K6-2+/III+ slowdown issues on ALi Aladdin V
Posted on 2015-10-16, 17:51
I ran 3dmark 99,2000 and dethkarz and i got this results: 3dmark 99: 640x480-3522 -8076 cpu 800x600-3504 -8157 cpu 3dmark 2000:640x480-1930 800x600-1918 1024x768-1884 Dethkarz:640x480-62.35 fps 800x600-61.64 fps 1024x768-54.04 fps Will test shogo and unreal gold edition tommorow,i don't have the …
Re: My Pentium MMX machine
Posted on 2015-10-15, 13:33
I use the same Jetway motherboard,but with a more powerfull config and it's a good solid board. My only problem with it was:the cpu socket placement,since i only had a taller cpu cooler,when i built the system,i had to cut a small part of metal from the case hard drive cage so i could fit the …
Re: Surviving the late 90's without 3Dfx
Posted on 2015-10-02, 09:43
I survived from 1996-2000 with a Dataexpert,ExpertColor branded S3 trio 64 V+,1 mb of ram http://web.archive.org/web/19970201080146/http://www.dataexpert.com.tw/ I wanted a Voodoo Graphics,but was never able to raise the money for 1. Got close to buy a Matrox Mystique with 2 mb of ram once,but i …
Re: Problem with d-sub and dvi videocard connectors
Posted on 2015-09-14, 09:45
I got another monitor and checked the cards again. The 1 with the d-sub doesn't display the problem with the new monitor. The dvi 1 still has the problem,if i move the cable in some position the screen even goes blank. I took pictures of the dvi connectors seems to be corosion on them. http://i1373. …
Re: Problem with d-sub and dvi videocard connectors
Posted on 2015-09-13, 13:24
Yes I did, with them screwed in the colours are wrong, only by unscrewing them and holding the connector wth my hand in a certain position, I get corect image, as soon as I let go it turns blue again.
Re: Problem with d-sub and dvi videocard connectors
Posted on 2015-09-13, 08:06
I don't think it's the cable since i only get the problem with this 2 cards,other cards i used don't give me the issue. Changing the cable it's impossible since it's not detachable from the monitor. In the case of the dvi video card i need to use a dongle since the monitor had only d-sub,but also …
Problem with d-sub and dvi videocard connectors
Posted on 2015-09-12, 18:52
I have the same problem on 2 videocards,1 with d-sub and 1 with dvi. When i plug the monitor cable,the image on the screen has a blueish tint. If i jiggle the connector a little i get to a position where the colours are fine,but as soon as i let go it becomes blueish again It's clear the connectors …
Re: Worst video card ever, again
Posted on 2015-09-12, 07:37
I been testing a Laguna 3d,agp version with 4 mb of ram and it's not that bad.U can play some old 3d games on it. So far i tried it with fifa 98 rtwc and it looks fine and works ok.
Re: No FM synthesis output from sound card
Posted on 2015-09-10, 12:07
Did u try to plug the speakers into the line connector?see if u get sound?
Re: Still working on finding my Windows 98 SE Final Build...
Posted on 2015-09-10, 09:08
When i bought my first pc at the end of 1996,my at case also had a 3 digit led display,which was necesary since my cpu was a k5-100mhz. Also the display was programable without jumpers,u had to press a combination of the reset and turbo button from what i remeber. And ofc i dumped that case in 2005, …
Re: Bought these (retro) hardware today
Posted on 2015-09-06, 20:10
Apparantly the pci express version of the fx5700 is called the 5750 by Asus, never knew that :lol: . I hate how Asus names their videocards,don't know why they couldn't just write on a sticker on the card the model of the chipset. Especially when u are at a flea market u find a card and then u have …
Re: Black Voodoo 1 card - please help identify
Posted on 2015-09-02, 12:57
This also is a good site. http://tdfx.de/eng/grafikkarten_alle.shtml From what this site says,it seems to be a Colormaster,never heard of this brand
Re: This Motherboard is Dead, Right?
Posted on 2015-09-02, 12:53
Afaik if the cpu fan doesn't spin then it's a cpu problem,can u try with another cpu?
Re: Matrox Millennium 2 weird add-on card - what is it and what does it do?
Posted on 2015-09-01, 12:19
https://web.archive.org/web/19970525021912/ht … cts/rrunner.htm
Re: Matrox Millennium 2 weird add-on card - what is it and what does it do?
Posted on 2015-09-01, 12:10
I think it's that Matrox Rainbow Runner add-on card.
Page 3 of 22