Re: Music Quest MPU clone cards, anyone interested in them?
Posted on 2015-10-20, 08:42
Yeaahh , im in the gold list 🤣 , whating for news ! , thanks!
Re: Roland MT-32 Power Supply Question - More or less V or mA
Posted on 2015-10-20, 05:56
Also check the polarity. Most of the Roland equipment's polarity is reversed (positive on the outside, negative on the inside). Thanks , good data, seeing the photo of the power supply I think it says on the drawing down of words and the voltage at the center is negative, I think, but I'm not sure, …
Re: Roland MT-32 Power Supply Question - More or less V or mA
Posted on 2015-10-20, 05:20
philscomputerlab wrote: 1V more should cause any issues, but it's not recommended. The mA figure should be higher than what is written on the MIDI device. The ones I use are 9V and 1660 mA. Good point , I thought it worked with 9V 650mA back of the MT-32 says, what would be the correct mA or …
Re: Roland MT-32 Power Supply Question - More or less V or mA
Posted on 2015-10-20, 04:53
Thanks for the quick response, I guess can use to check if it works well the MT-32 and use it for a short time until buy the power supply 9V 650mA
Roland MT-32 Power Supply Question - More or less V or mA
Posted on 2015-10-20, 02:48
Hello people ! I arrived today my MT-32 both expected (soon SC88), I came up with this power supply 10V - 860mA using this power source could damage the equipment? Since the voltage is increased and mA Thanks in advance !
Re: Music Quest MPU clone cards, anyone interested in them?
Posted on 2015-10-12, 04:11
Great ! , that's good news, I'm really interested in one of these
Re: SoftMPU - Sound Blaster Pro 2 - Game compatibility may be reduced
Posted on 2015-10-01, 14:02
Thanks people , I'll end up using a Sound Blaster AWE GOLD, I guess I will have a better compatibility after reading the wiki, thank you!
Re: Roland MT32 - Direct Connection to Serial / COM1 SoftMPU
Posted on 2015-10-01, 12:55
Thanks jesolo , i was seeing that there is no upgrade post, I will ask what's new However, I'm not sure whether you can actually use this feature with an MT-32, due to the 5-pin MIDI DIN interface. You can, certainly, but it requires the use of a go-between to perform the 38400-baud serial -> 31250- …
Roland MT32 - Direct Connection to Serial / COM1 SoftMPU
Posted on 2015-09-29, 14:45
Hi people! its possible to connect directly to com1 the MT32 use with SoftMPU to play games Sierra? or if there is some kind of special cable .. thanks
SoftMPU - Sound Blaster Pro 2 - Game compatibility may be reduced
Posted on 2015-09-29, 13:19
Hello people! Im a question , " The optional /OUTPUT:SBMIDI switch forces Sound Blaster MIDI to be used. This mode is intended for use with the Sound Blaster Pro 2 and other sound cards without a hardware MPU-401 interface. Game compatibility may be reduced. " in that sense decreases compatibility …
Re: Looking for images of X-wing diskettes and Gateway diskettes to repair my copy
Posted on 2015-09-28, 02:35
Yeah if you have direct rips, the other ones I got were not original. They were downloaded off something else so they didn't fit on a real diskette because whoever packaged it added extra files. At least that's how it was in the case of X-Wing. However if you have both gateway and Xwing I'll take …
Re: Computer Chronicles automated download
Posted on 2015-09-26, 04:40
Re: DUNE II : Roland MT-32 + Sound Blaster support ?
Posted on 2015-09-25, 10:07
I think he's asking something else. SoftMPU allows using MPU401 devices through the Sound Blaster MIDI interface. The SB 2.0 doesn't have a proper MPU401 interface. And he's wondering if speech AND external MIDI will work. I did test SoftMPU on the SB 2.0 a while ago, but I simply cannot remember …
Re: Anyone have/use Sigma Design's RealMagic ISA MPEG decoder? Games list?
Posted on 2015-09-24, 03:23
Link : 24-09-2015 https://mega.nz/#!Qp9g1bjS!0XjgTAg48u9CZg1Q3r … FevPHtL0T8XNR8E
Re: Anyone have/use Sigma Design's RealMagic ISA MPEG decoder? Games list?
Posted on 2015-09-24, 01:36
Uploading !
DUNE II : Roland MT-32 + Sound Blaster support ?
Posted on 2015-09-23, 20:07
Hello people Soon I'll buy a MT32 and using SoftMPU " http://bjt42.github.io/softmpu/ " driver with a Sound Blaster Pro 2.0, I wanted to know if it was possible to operate the DUNE II with the MIDI out by the MT32 and the sound from the Sound Blaster Pro Thanks!
Re: Computer Chronicles automated download
Posted on 2015-09-23, 19:02
Re: Anyone have/use Sigma Design's RealMagic ISA MPEG decoder? Games list?
Posted on 2015-05-13, 00:43
fixxx Im upload tomorrow and share here , and im upload the diskette image reel magic isa 16bits too
Re: Anyone have/use Sigma Design's RealMagic ISA MPEG decoder? Games list?
Posted on 2015-04-27, 03:40
Thankssssss !!!!!! , im looking for 25 years !!!
Re: Maxi Magic EMS EV-165A Question
Posted on 2015-04-27, 03:33
I found it , i think is useful to someone, thank "ur99ru" for sending me an email and kindly share the file to run the card Link : http://www.mediafire.com/download/qj41f156a7x77i5/ev165.zip
Page 4 of 5