Re: Best software to test IDE drives in Windows 2k/XP
Posted on 2019-12-26, 08:43
HDTune for quick performance tests. HDDScan (v3.x) and/or Victoria (v4.x, 5.x) for surface access time scan (to reveal bad blocks and slow sectors).
Re: Rainbow Arts Soundman ? Adlib Clone - can it play Digital Sound ?
Posted on 2019-12-12, 22:54
I've tried to decode and simulate address decoder of Rainbow Arts Soundman from photos. This card puts OPL2 on base addresses: 0x380, 0x388, 0x38E. And 8-bit Non-DMA DAC on base addresses: 0x220, 0x221, 0x228, 0x229, 0x22E, 0x22F, 0x300, 0x301, 0x308, 0x309, 0x30E, 0x30F And all of those ports are …
Re: FMonster, the monster of sound synth
Posted on 2019-12-12, 22:51
Two more months passed... I've fixed some errors in some blocks and rearranged those on the board. New order (left to right): SN PSG, 2xSAA (CMS), 2xOPL2 (2xAdLib, SB Pro), AY (CSM), 2xSID (2xSSI-2001, DuoSID), OPL3. Filename fmonster_2019-12-12_01.png File size 183.38 KiB Views 632 views File …
Re: FMonster, the monster of sound synth
Posted on 2019-12-09, 09:03
Rainbow Arts Soundman also listen to 0x300 maybe Voice Master too? I've tried to decode and simulate address decoder of Rainbow Arts Soundman from photos. That's what I've came up with. ports_RainbowRunner_2019-12-09_01.png ports_RainbowRunner_2019-12-09_02.png ports_RainbowRunner_2019-12-09_03.png …
Re: FMonster, the monster of sound synth
Posted on 2019-12-02, 09:55
jaZz_KCS wrote: Please put me on the list Ok. And about my question above? LPT DAC (0x378/0x278), Covox Sound Master (0x2X2/0x2XF), Covox Voice Master (0x22F)... Anything else? No more DACs were known? (no-DMA variants)
Re: FMonster, the monster of sound synth
Posted on 2019-11-22, 09:46
There is also a variant of auto detecting Stereo ability.. ... Here is shock_`s latest schematic, without warranty. se are descripted here: https://dosreloaded.de/forum/index.php/Thread/1091-Disney-Soundsource-Clone-DOS-Reloaded-DE-Edition/ Sorry, but that is a type of circuit I've been talking …
Re: FMonster, the monster of sound synth
Posted on 2019-11-20, 22:00
Now working on some minor optimizations of "big board": - tidying up silkscreen - tidying up shared logic (Reset inverter, /IOR and /IOW repeaters, high-address decoder) - adding debug LEDs (reset/power rails/MIDI TX-RX) 2019-11-21 00.54.16.png Board now decodes 15 of 16 bits of address bus (instead …
Re: Covox Sound Master Reverse Engineering / Replica
Posted on 2019-11-08, 00:22
An update on CSM. SMD variant is almost done. Filename AY_SMD_2019-11-07_top.png File size 110.26 KiB Views 1105 views File comment CSM @2019-11-07
Re: Covox Sound Master Reverse Engineering / Replica
Posted on 2019-10-19, 16:15
In the meantime I've made PCB for this: Filename AVR_AY_2019-10-16_top.png File size 11.58 KiB Views 1195 views File comment AVR-AY top Filename AVR_AY_2019-10-16_bottom.png File size 62.28 KiB Views 1195 views File comment AVR-AY bottom
Re: FMonster, the monster of sound synth
Posted on 2019-10-02, 17:54
Will most DOS games sound different but comprehensible at those speeds, or are those settings better suited to tracker playback of some sort? For DOS games, expecting Covox Sound Master user should select 1.7898 MHz as is on original CSM . Other frequencies are listed for listening music from …
Re: FMonster, the monster of sound synth
Posted on 2019-10-01, 23:36
Look at what I've got on the left side of the board... :evil: fmonster_2019-10-02_01.png AY block required 4 different clock sources, so I've had not only add one more generator (4th one) into clock-gen block, but also to heavily optimize and re-route bottom part of 2xSID block and ISA bus part of …
Re: Covox Sound Master Reverse Engineering / Replica
Posted on 2019-10-01, 23:24
An update. I've revised and updated GAL replacement logic and redid SMD layout from scratch. :dead: csm_sch_2019-10-01 22.28.19.png I've managed to remove a couple of ICs from the GAL replacement section and re-structure logic utilization between different parts of the board. Also, at the moment I …
Re: Creative Music System (CMS) / Game Blaster MIDI drivers
Posted on 2019-10-01, 22:04
Tronix hello. I've implemented your circuit in "CMS" debug block for FMonster. I can send you blank debug board if you are interested.
Re: FMonster, the monster of sound synth
Posted on 2019-09-22, 21:05
Nothing particularly interesting to add, but i just wanna say i'm very impressed by Fagear's work. The optimization of the modules os nothing shirt of amazing, and i've wondered about the possibility of a lite version of this card including only CSM, 1*SID (instead of duosid), GameBlaster and Tandy …
Re: New sound card project: AWE64 Legacy
Posted on 2019-09-21, 22:07
...strange behaviour of the Line In jack on CT4520. In fact, it did mono while it was clearly supposed to be a stereo input. CT4390 acted the same. We've become curious, traced the signal, and had to desolder the jack, and we've found a jumper trace there, shortening L and R channels of the stereo …
Re: FMonster, the monster of sound synth
Posted on 2019-08-26, 16:06
WAs the -12V is the biggest load on the board, I think it is fair to assume this will have to come via the ISA bus, and can't be generated via DCDC converters on the board itself. No, +12V rail has the biggest load (but still within specs for ISA). The problem is in current paths if molex will be …
Re: FMonster, the monster of sound synth
Posted on 2019-08-22, 12:27
root42 wrote: Just put a molex connector on the card. Just like today's GPUs. 😉 Molex won't provide -12V rail. 😕 And it will introduce power and ground loops.
Re: FMonster, the monster of sound synth
Posted on 2019-08-21, 23:49
root42 , Scali either way, I've added "diode OR" for all jumper positions on OPL2 block. Now it is possible to set jumper to ALL locations at once and the board will work just fine. So It can be: SB (L:0x220/R:0x222, LR:0x228), AdLib (LR:0x388), PAS (L:0x388/R:0x38A) and THE SAME TIME if you really …
Re: FMonster, the monster of sound synth
Posted on 2019-08-19, 23:51
Would it be possible to consolidate at least some of the 74xx logic into a bunch of GALs? It is certainly possible, but I'm not doing it. The theme for the project: "no programmable devices". That includes GALs, FPGAs, MCUs, ROMs. I'm looking into making next generation of FMonster as USB-connected …
Re: New sound card project: AWE64 Legacy
Posted on 2019-08-19, 23:45
We've been waiting for your comments, I was starting to get a bit nervous not seeing it after a week since we went public on this :D A was too busy at work, sorry. :dead: We've opted for placing them on both sides in order to keep the PCB within the ISA Half-Size measures, otherwise it would exceed …
Page 2 of 15