Re: Info needed on 286 board
Posted on 2020-10-14, 17:23
Here's the program ^^ Filename GETROM.ZIP File size 25.69 KiB Downloads 5 downloads (use ROMSAVAT.EXE)
Re: Upgrading an old Phoenix BIOS
Posted on 2020-10-14, 15:39
There is ! It's over here ^^ http://www.win3x.org/uh19/motherboard/show/3749 My site is an interactive version of the other site you linked. Basically I took the static pages, parsed them and made a database out of it. It also makes updating or adding new pages very easy.
Re: Upgrading an old Phoenix BIOS
Posted on 2020-10-14, 14:42
Considering the age of this board it's unlikely you'll find a newer version of it online. Maybe someone did back in the days but they probably had to call for the technical service or something. However we are interested by infos about your board for UH19 (see signature) and even if possible a bios …
Re: Info needed on 286 board
Posted on 2020-10-14, 11:02
I can give you another source, but I don't have the time for that right now. iirc you can find it on vcfed.
Re: Mitac MSC-242 Isa motherboard manual / jumper settings?
Posted on 2020-10-13, 19:25
Here are some SVGs taken from my HDD. Filename SBC.zip File size 67.29 KiB Downloads 23 downloads They're basically the source material to what have been used to create the images on TH99, but here you can easily move elements, and it'll be better for people to edit it later if something's wrong ^^ …
Re: Info needed on 286 board
Posted on 2020-10-13, 19:16
Well according to UH19, which has for source Microhouse Technical Library, it is rated for 20MHz. If I knew which chipset this board uses, it may actually help figuring out what this board is capable of 😀
Re: Mitac MSC-242 Isa motherboard manual / jumper settings?
Posted on 2020-10-13, 08:56
Sure you can add it 😀 Do you think you could draw a schema based on your physical PCB and the one from the manual ? I can give you svg files that you can reuse Now your picture is nice, although a bit cropped on the back of the card 🙁
Re: Locating belt for Citizen W1D floppy drive belt.
Posted on 2020-10-13, 08:26
I wonder about another solution, did anyone ever managed to replace W1D with another drive (with direct motor)? It is possible only if enough available place to fit, cause usually all other drivers are much bigger. Some drives use the same pinout but the problem is exactly this, some drives are …
Re: Info needed on 286 board
Posted on 2020-10-13, 05:21
Use this tool to backup your bios https://www.pcorner.com/download?filename=Vsf … xf2fP9xSz6hY%3D
Re: History of a dump went wrong :cry:
Posted on 2020-10-12, 18:36
This happens to me all the time ! I don't know what's up with the disks that do this, but there's nothing you can do about them unfortunately ... And yes they do ruin perfectly working floppy disk drives. You have to clean the drive's heads after reading one of these disks or else, as you …
Re: Info needed on 286 board
Posted on 2020-10-12, 15:34
This must be your board http://www.win3x.org/uh19/motherboard/show/2821 (It should answer for "1)") 2) "pins" = 30 pin sipp memory connector. It didn't last long, it's been replaced with 30 pin simm. You can mod your motherboard to support simm memory slot (the pinout is exactly the same and your …
Re: Is an Arduino IPU possible for Vintage PCs?
Posted on 2020-10-12, 10:58
Using mTCP for this project could be another starting point as the https support could then be ported to all the mTCP suite ^^ (And prevent you from reinventing the wheel for TCP/IP support on 8088)
Re: Is an Arduino IPU possible for Vintage PCs?
Posted on 2020-10-11, 17:15
Well before starting to look for a hardware solution, I'm really wondering how long it would take on vintage hardware, instead of having just guesses ^^
Re: Is an Arduino IPU possible for Vintage PCs?
Posted on 2020-10-11, 13:26
I'd like to go all the way down to 8088, so DJGPP is out of question here :( Having HTTPS being slow isn't that big of a deal imo, unlike games where you have to do stuff as fast as possible, if getting the content from a web page takes 2 seconds, it's not a big deal, and I'm sure that people using …
Re: Is an Arduino IPU possible for Vintage PCs?
Posted on 2020-10-11, 12:24
Having DOS SSL support of some sort would be awesome ! I have some project ideas that could benefit from it.
Re: PC Chips M912 BIOS update for Am5x86 and Cyrix 5x86
Posted on 2020-10-10, 15:15
I made a improved version that's been ocr-ed and is now available right here http://www.win3x.org/uh19/motherboard/show/573 😀
Re: BIOS image collection - requests, discussion etc
Posted on 2020-10-10, 14:48
By "reverse-engineering" Microhouse Technical Library which is the source of Total Hardware 1999 we managed to extract the images from the documents. Originally they were made with Word 2.0 in a proprietary vector image type. But thanks to mR_Slug and scorp, we managed to extract them and turn them …
Re: Laser 386M - 386 M/B
Posted on 2020-10-10, 14:43
I'm not sure, you'd need to peel off the sticker to see what reference they have. By the way it's possible that your ROM dump is incomplete (I'm not saying it is, but it could be), because ATROM is limted to 64KB bios max and it's possible that the 4 rom make a total of 128KB. If you want to buy a …
Re: Laser 386M - 386 M/B
Posted on 2020-10-10, 13:01
Thank you very much ! Everything is on the page now 😀
Re: BIOS image collection - requests, discussion etc
Posted on 2020-10-10, 10:14
https://www.vogons.org/viewtopic.php?p=900481#p900481 http://www.win3x.org/uh19/motherboard/show/3206 Hmm they seem to be a pretty close match . Their jumpers aren't 100% identical, but those which match are labeled exactly the same (Jp16 between the VLB slots, JP11/JP9 nearby the cache , etc). IPC …
Page 28 of 150