Re: Voodoo 2 freezing in games
Posted on 2020-01-01, 05:08
The card is overheating and/or requires downclocking.
Re: Looking for a fast vesa local bus card for DOS gaming
Posted on 2019-12-31, 18:24
However, VGA modes are handled by Weitek 5186 that sits on ISA bus and thus the poor results in other tests. You can force Build engine games to use VESA 320x200 mode. It also will provide performance boost on normal cards.
Re: Looking for a Socket 478 motherboard
Posted on 2019-12-31, 03:12
Though I don't suppose you'd still find vulnerable ICH5 boards with working USB to protect. Easy. Any boards which were used in cases without front USB panel.
Re: Looking for a fast vesa local bus card for DOS gaming
Posted on 2019-12-31, 02:58
It all boils down to which CPU you use. With DX2-80 the difference between cards is negligible, but with AMD 5x86-160 it could be much more profound in some games. And not all top tier cards are on friendly terms with 40Mhz VLB bus.
Re: Looking for a Socket 478 motherboard
Posted on 2019-12-30, 19:55
Agreed but Asus was the worst of them. Of course they are. They were and are the biggest motherboard manufacturer outside OEM.
Re: Looking for a Socket 478 motherboard
Posted on 2019-12-30, 18:05
they were notorious for blown chipset based USB ports. The problem is common for many ICH5 based boards, not just ASUS.
Re: The World's Fastest 486
Posted on 2019-12-30, 16:47
Now I can confirm that Yamaha YMF719E-S sound card works with 20Mhz ISA bus.
Re: Am5x86 heatsink question
Posted on 2019-12-30, 13:28
Depends on which 5x86 revision you have. ADW or ADZ? ADZ can work without heatsink.
Re: The World's Fastest 486
Posted on 2019-12-29, 23:42
System hangs at post when lowering... WIth every available option?
Re: The World's Fastest 486
Posted on 2019-12-29, 22:51
Will there be any difference if I change to a newer card like G200 or ET6000? I doubt it. You can improve your score with better timings.
Re: The World's Fastest 486
Posted on 2019-12-29, 22:03
Sidenote: I did some experiments with late Am486DX2-66V16BGC (ADZ with 2x/3x multiplier) trying to achieve 66Mhz front side bus and I must say it's not worth the effort. Even if I'll magically get 200Mhz capable AMD 5x86 CPU, I had to sacrifice cache and memory timings more. So overall performance …
Re: Is it possible to build one WIndows 98 machine to be compatible with all games?
Posted on 2019-12-29, 15:49
System: Socket A motherboard and Athlon XP with unlocked multiplier. Video: Some GeForce FX card or lower + Voodoo 2. Sound: Aureal Vortex 2 + Sound Blaster Audigy.
Re: SiS 6326 AGP great card!
Posted on 2019-12-28, 23:05
As an AGP card, it's quite horrible and no amount of good DOS compatibility could redeem it.
Re: DOS/Win9x PIII build - ECS P6BAP Me
Posted on 2019-12-28, 22:49
I would start with checking your CPUs on another board.
Re: Possible new build (Dual Tually) questions
Posted on 2019-12-28, 22:41
I'd personally avoid SSD drives on pre-windows 7 setups. SSD drives like Intel X25-E don't do TRIM and don't need it really, like most SLC based drives. There's also utilities to force TRIM on older OS. And if that's not enough: TRIM is not required with sufficient over-provisioning.
Re: DOS/Win9x PIII build - ECS P6BAP Me
Posted on 2019-12-28, 22:35
It it suddenly stops, there must be short circuit.
Re: GA-5AA rev1.1 Manual Available?
Posted on 2019-12-28, 20:11
Thanks for that but is not having jp16 going to be a problem for a K6-2+-550 If you look carefully, you will notice that JP16 is substituted by SW1 on early revisions. But revision 1.1 might be not compatible with K6Plus. Most likely will only require official BIOS update though. Anyway, the manual …
Re: GA-5AA rev1.1 Manual Available?
Posted on 2019-12-28, 19:50
GA-5AA 1.1 is identical to 2.2 revision, when it comes to jumpers: Gigabyte GA-5AA revision 1.1, 2.2 and 3.2 differences Pretty much everything is labeled on PCB, so the manual is not required.
Re: The World's Fastest 486
Posted on 2019-12-28, 06:14
I'm not sure why you are having trouble with the Voodoo3 on your system. I'd check to see if it works with a 30 MHz PCI bus. No, the problem persisted even on stock settings. The last official driver is not compatible with SIS chipset or 486 CPUs in general. I think Riva TNT2 with Detonator 2.08 …
Re: Sound Blessed / Sound Cidblues (chinese PCIe SoundBlaster Live)
Posted on 2019-12-28, 04:07
My new computer has no PCI slots, only PCIe, so I couldn't re-use my old Soundblaster Live that I had been using all that time Use PCItoPCI-E adapter.
Page 85 of 176