Re: Acorp 5VIA3-P - MANUAL needed, pls!!
Posted on 2020-06-14, 21:30
Thank you evasive for your effort and for the tips. I still haven't had any luck either .. 😒
Re: Acorp 5VIA3-P - MANUAL needed, pls!!
Posted on 2020-06-09, 22:34
This is originally a SuperPower/Hope Vision/San-Li/Fong Kai Industrial board under the name of SP-586VT3. Now if only I could find a manual on any of those domains I would be happy. Acorp is obviously in the relabeling bussiness as I already spotted a FordLian board in their collection as well. …
Re: Acorp 5VIA3-P - MANUAL needed, pls!!
Posted on 2020-06-04, 21:14
Yeah, on the Acorp 5via3-p , "JBF3" seems to be recommended "open" for all the multipliers (from 1.5x to 3.5x [in steps of 0.5]). On my board, it's open too. Maybe in a beta version of the board, it had an extra multiplier setting.. like 1x or something... but was later dropped when the board …
Re: Acorp 5VIA3-P - MANUAL needed, pls!!
Posted on 2020-06-04, 18:45
sooo.. After a lot of perspiring, and a 220v shock through my chest (fingers in the wrong place while pressing the ON switch), the results are finally in: On my Acorp 5VIA3-P (Rev. 1.0) ; the "JD" jumper controls only the SDRAM voltage. Jumper on [1-2] --> 3.3V Jumper on [2-3]-->5V ** on the board, …
Re: Acorp 5VIA3-P - MANUAL needed, pls!!
Posted on 2020-06-04, 02:25
Actually that might be way better than my needle-poking shenanigans 😁 Thanks darry!
Re: Acorp 5VIA3-P - MANUAL needed, pls!!
Posted on 2020-06-04, 02:03
So I found this pinout schematic (surprisingly hard to find for SDRAM.. google keeps shoving DDR down my throat) : https://allpinouts.org/pinouts/connectors/memory/dimm-sdram-168-pin/ Dunno if anyone here is electronically inclined, but there are a total of 17 VCC pins , and 18 VSS pins. I reccon …
Re: Acorp 5VIA3-P - MANUAL needed, pls!!
Posted on 2020-05-31, 00:30
I hate to burst everyone's bubble; but that's actually my board. That's the ad I bought it from :P It had a 128MB fsb133 DIMM stuck in there, (that in theory should have been detected as 64MB) but it would not boot with it. I will try these next few days to do the multimeter thing, and will come …
Re: Acorp 5VIA3-P - MANUAL needed, pls!!
Posted on 2020-05-29, 11:37
I knew I had an Acorp manual here, but just pulled it out, and it's for 5ALI61. Which of course is ALI chipset. However, it does have a jumper for the DIMM slots. It says that it supports 3.3V SDRAM if JP5 has both jumpers set to 1-2 and 5V EDO/FPM jumpered both to 2-3. Maximum for the DIMM slot is …
Re: Acorp 5VIA3-P - MANUAL needed, pls!!
Posted on 2020-05-28, 20:16
Yeah.. I found that link too.. Almost wanted to bang my head against the table when I saw that it was right there, and now it's gone.. 🙁 I even tried google searches in Russian, but still nothing 🙁
Re: Acorp 5VIA3-P - MANUAL needed, pls!!
Posted on 2020-05-27, 02:43
In case someone else stumbles upon this thread, here are some useful pictures of the manual that I found (sadly no full manual yet). And the latest BIOS + the reflashing utility (both from the Acorp website, using the WB Machine)
Re: Acorp 5VIA3-P - MANUAL needed, pls!!
Posted on 2020-05-27, 01:47
Thanks evasive, but I already have the CPU jumper settings. (LATER EDIT: for anyone interested in the original website: https://web.archive.org/web/20020804033818/http://www.acorp.com.tw/Common/jumper/TEST/5via3p.htm -- https://web.archive.org/web/20020625070802/http://www.acorp.com.tw/common/Jumper …
Re: Acorp 5VIA3-P - MANUAL needed, pls!!
Posted on 2020-05-25, 22:48
Thanks imi ! Except for the missing Jumper on the side of the first SIMM slot, it actually seems to be near identical to mine! Maybe i'll have more luck with the 5V-2 manual. Up untill now, I only had the Tomato 5SVA manual to go by... which was close-ish.. If I find the the 5V-2 manual, i'll also …
Re: Acorp 5VIA3-P - MANUAL needed, pls!!
Posted on 2020-05-25, 12:49
Thanks so much Doornkaat !!
Re: Acorp 5VIA3-P - MANUAL needed, pls!!
Posted on 2020-05-25, 04:25
Thanks darry! But i've already tried "acorp.com" and "acorp.com.tw" using the WayBack Machine, and was helpful in sorting the CPU jumpers... but the links for the Manual are long gone :( On the brite side, the board already has the latest bios; so i don't have to mess with that too :) Also, I dug …
Acorp 5VIA3-P - MANUAL needed, pls!!
Posted on 2020-05-25, 02:16
Hey all. I recently got this Acorp 5VIA3-P Motherboard with a Pentium MMX @200mhz, and was looking forward to using an old 32MB DIMM which I kept since the late '90s (it has 2 "HY57V651620TC-10" chips, on each side), but the board won't POST or even beep. It does, however, work fine with 72-pin …
Re: Shuttle HOT 555 VER 1.41 BIOS
Posted on 2020-05-19, 02:04
This might just need FPM ram, instead of EDO.
Microsoft Sidewinder Force Feedback installation CD
Posted on 2020-03-09, 10:23
Re: https://www.vogons.org/viewtopic.php?f=46&t=45805 I haven't uploaded anything to VOGONS Drivers because I am waiting for SquallStrife to set up an account. When SquallStrife gives the green light, I will upload the ISOs for both the regular SideWinder wheel and the Force Feedback wheel. Please, …
Re: 440BX-2? Differences from 440BX.
Posted on 2018-11-27, 22:14
Thanks for the info!!
Re: The New Creative Labs Sound Blaster Drivers Collection. (Updated 6th Jan. 2014)
Posted on 2017-09-06, 17:05
`Hello everyone. I have some Creative CD's that i see are not up on vogons drivers, and i'd like to upload them. I tried to PM SquallStrife twice, but 2 weeks have already passed and no response. Does anyone have any suggestions? Some of the stuff i have includes: - Audigy 4 - "Installation" CD (for …
Page 7 of 7