Re: Need PWM Spec of Asus P4T-E rev 1.0 mobo
Posted on 2022-03-17, 15:37
Thanks pals, a new hope ahead ^&^
Need PWM Spec of Asus P4T-E rev 1.0 mobo
Posted on 2022-03-16, 15:53
Hi, I'm rebuilding the first generation Pentium 4 system. luckly I just spent $10 to get an ASUS p4t-e motherboard. Of course, this motherboard was marked as no POST, but when I got it, I realized that the PWM IC of CPU had been disassembled for repairing, but the work seem not completed and leaving …
Re: Need driver for ExpertMedia MED1600 with 82C928 + 1848 - An alt version of OPTI MAD16 ?!
Posted on 2021-11-09, 01:54
Schule04 wrote on 2021-11-08, 15:55: Have you tried this driver? http://files.mpoli.fi/hardware/SOUND/OTHER/928DNW.ZIP Thank you. Yes I have tried it and got the results above. Not sure if it supports both CS4231 and AD1848 codec
Need driver for ExpertMedia MED1600 with 82C928 + 1848 - An alt version of OPTI MAD16 ?!
Posted on 2021-11-08, 07:30
ExpertMedia MED1600 is OPTI82C928 + AD1848 also with FCCID K2Y-AUDIO16C just like OPTI MAD16 82C928+ CS4231 Look good with WaveTable head and OPL3 clone IC MED1600.jpg MAD16_OPTI82C928_CS4231.jpg There are none factory driver on net And it may suit with part of OPTI MAD16 82C928+ CS4231 driver, it …
Re: UNISOUND - Universal ISA PnP Sound Card Driver for DOS v0.76f
Posted on 2021-11-08, 04:40
OTI601 has no PnP support, it has only its own custom jumperless configuration like some OPTi cards and many others that predate the ISAPnP spec. Later OTI605 adds PnP support. I see. And it looks more complicated, the card fits the OTI-601B driver, but not with OTI-601E and OTI-601F driver. How to …
Re: UNISOUND - Universal ISA PnP Sound Card Driver for DOS v0.76f
Posted on 2021-11-08, 01:47
Diamond Mozart OPL3 ISA PNP Sound Card don't be supported by Unisound v7.6f The card is working with factory driver, such as 601b112. The download links paged by Phils https://www.philscomputerlab.com/btc-1820-mozart-oak-oti601.html The host: Intel PIII-1000EB / 440BX MS-DOS 6.22 Matrox G450 DH PCI …
Re: HWiNFO for DOS resurrected !
Posted on 2021-04-05, 17:01
How about 8088 / XT / AT support? Hmm...
Re: Octek DCA2 Dynamic Cache Architecture 2, 486 Boards
Posted on 2021-02-20, 17:37
After long time I made some tests with the DCA2 hardware. Configuration isn't easy, because the documentation is pretty poor. No way to switch the Am5x86 chip and other WB enhanced chips to writeback mode. Speedsys says 5x86WB cpu, suggesting activated wb mode, but L1 throughput shows that it isn't …
Re: UNISOUND - Universal ISA PnP Sound Card Driver for DOS v0.75e
Posted on 2020-12-08, 06:27
Undocumented? Did you read the BLASTER environment variable in unisound.txt? It's listed right there. It's not a normal BLASTER switch that other programs use. It's something custom for unisound. It’s my stupidity, I didn’t look at UNISOUND.TXT carefully but went to Google >.< In addition to the …
Re: UNISOUND - Universal ISA PnP Sound Card Driver for DOS v0.75e
Posted on 2020-12-07, 14:14
Lennart wrote on 2020-12-07, 12:55: Have you tried adding the U0 parameter to your BLASTER variable? That should control the MPU IRQ according to the documentation. A value of 0 should disable it. What a great undocument parameter for BLASTER ! I can set the IRQ parameters of MPU-401 synchronously …
Re: UNISOUND - Universal ISA PnP Sound Card Driver for DOS v0.75e
Posted on 2020-12-07, 11:54
The easiest way is to set the BLASTER variable in your AUTOEXEC.BAT before executing UNISOUND.COM like this: SET BLASTER=A220 I5 D1 H5 P330 T6 rem A220 = Port Address (in this case 220h) rem I5 = Interrupt (in this case 5) rem D1 = DMA channel (in this case 1) rem H5 = "High" DMA channel (in this …
Re: UNISOUND - Universal ISA PnP Sound Card Driver for DOS v0.75e
Posted on 2020-12-07, 07:07
Amazing, it WORK and save my life on my collections of ISA sound cards! Especially for those PNP sound cards whose DOS drivers are not friendly enough, I have not been able to get them to work under DOS for a long time... I will test them one by one. nusound.jpg Orchid NuSound PnP 32 - Crystal …
Re: Cisco Aironet 350 DOS Drivers?
Posted on 2020-11-30, 14:37
one download source is https://www.aironet.de/indoor-products_client_download.html another one is http://nwserveur.no-ip.org/win3xorg/devices/P … ient%20Adapter/ Good luck!
Re: FIC PA-2013 Ver 2.1 and Voodoo3 3000 AGP
Posted on 2020-11-25, 01:47
The spec of Cache chips should tell about the total cache capacity, both of my PA-2013 MOBOs has 4 cache chips, the one contains cache chips W25P222A-4F, it's 32Kx64bit means total 1MB cache ( 32 x 64 x 4 / 8 = 1024KB ), the other one is Rev2.1 with 2.0- E-O036 mark and contains cache chips …
Re: Latest ATI Catalyst driver for Top AGP2X Radeon 9800Pro on Win95 ?
Posted on 2020-07-10, 11:54
They call it phobia due to lack of speed ;) There are many bottlenecks for legacy OS or some components, such as max RAM size or AGP 2X bandwidth. But each one is the fastest, So the shortest board of barrel is still the longest, right? So, the max version of DirectX for Win95 is 8.0a , then the …
Latest ATI Catalyst driver for Top AGP2X Radeon 9800Pro on Win95 ?
Posted on 2020-07-10, 10:11
I'm building a hybrid & high end retro PC for DOS6.22 & Win3.11 & Win95OSR2.5 & Win98SE Mobo: iWill DBS100(440BX & FSB133) Dual Slot1 with PIII-1G RAM: PC133 CL2 256MB x 2 ( Max 256MB x 4 for NT4 or 2K late) Video: Nvidia Geforce Ti4600 & ATI Radeon 9800 Pro @ AGP 2X HDD: Intel SSD 80GB mSATA to …
Re: High DMA Woes (GUS, SB16, etc)
Posted on 2020-03-11, 12:40
Hmmm this thread has me interested. I recently configured a 386 with Vibra16 to use D3 H3. All tests with Diagnose pass, what test should I do to determine if I don’t have full functionality? DIAGNOSE can do the work. When you select High DMA and pass the "test", you can play 16bit digital sound on …
Re: High DMA Woes (GUS, SB16, etc)
Posted on 2020-02-16, 21:09
from: http://ccftp.creative.com/manualdn/Manuals/TSD/2390/awe32.pdf D-4 Troubleshooting Problem System hangs during 16-bit digitized sound test. But 8-bit works fine. Cause Your system’s mother board cannot handle High DMA at full speed. On some machines, the DMA controller on the motherboard does …
Collectible 386 Motherboard OPTi 82C392 / 82C391B / IMP82C206P with L1 cache
Posted on 2020-01-17, 09:33
Another collectible 386 Mobo but no brand and model 8 Pin30 SIMMs 8+1 DIP28 cache sockets ( 128KB cache preloaded ) AMD 386DX-40 / Intel i387DX-33 preloaded ( dual sockets ) OPTi 82C392 / 82C391B / IMP82C206P chipsets There are little leakage around the battery Fortunately, it can still boot and …
Re: FIC PA-2013 Ver 2.1 and Voodoo3 3000 AGP
Posted on 2019-08-13, 08:12
The spec of Cache chips should tell about the total cache capacity, both of my PA-2013 MOBOs has 4 cache chips, the one contains cache chips W25P222A-4F, it's 32Kx64bit means total 1MB cache ( 32 x 64 x 4 / 8 = 1024KB ), the other one is Rev2.1 with 2.0- E-O036 mark and contains cache chips …
Page 1 of 2