Re: Good news everyone! A new mTCP is available! (2022-07-01)
Posted on 2022-07-02, 19:00
Ubiquity Edge Router X
Re: Good news everyone! A new mTCP is available! (2022-07-01)
Posted on 2022-07-02, 16:22
My DHCP server doesnt issue a host name though. It just removed the line and didnt replace it with anything
Re: Good news everyone! A new mTCP is available! (2022-07-01)
Posted on 2022-07-02, 15:21
The hostname directive disappears from the config file after DHCP is run
Re: What are the best Vga to hdmi scalers or peripherals for MS-DOS games ?
Posted on 2022-07-02, 02:21
Please expand on different use case? Cheers, The 300 normalizes everything to highly compatible timings. It's a true scaler. The OSSC is simply a line multiplier. So it depends on whether your display and/or capture card can handle 70Hz and non standard resolutions like 1280x960 and 1400x800. The …
Re: 20th Anniversary of Vogons
Posted on 2022-07-01, 20:10
VOGONS: 20th Anniversary Retro Edition? Sure, why not! logo-20anniversary.jpg It is gratifying for me to see how long and how well VOGONS has remained relevant, especially given how many online community spaces have been absorbed by the big corporate social networking sites. Happy anniversary to …
Re: What are the best Vga to hdmi scalers or peripherals for MS-DOS games ?
Posted on 2022-07-01, 01:12
I would argue the OSSC is better but it's honestly a different use case Please expand on different use case? Cheers, The 300 normalizes everything to highly compatible timings. It's a true scaler. The OSSC is simply a line multiplier. So it depends on whether your display and/or capture card can …
Re: What are the best Vga to hdmi scalers or peripherals for MS-DOS games ?
Posted on 2022-07-01, 00:55
I would argue the OSSC is better but it's honestly a different use case
Re: Which ISA card best completes a dos/9x system (already have 9x pci cards and wavetable)?
Posted on 2022-06-30, 20:32
I like ESFM a lot, but then again I also don't mind Crystal FM either. For the record I despise CQM
Re: Network card - isa or pci?
Posted on 2022-06-30, 20:31
Errius wrote on 2022-06-30, 19:43: OT. I have a 10 mbps EISA card (3C592-C), which confuses me. Why does 10 mbps need a 32-bit interface? Probably for the superior bus mastering offered by EISA not pure bandwidth
Re: Longshine LCS-6610F floppy controller (For 4 floppy build)
Posted on 2022-06-30, 20:05
That's awesome that his BIOS supports secondary FDC, but you're going to have to edit it further to tell it both FDC are at IRQ6/DMA2. The LCS card is hard wired to those (as are 95% of FDC) and they can be shared with proper port writes to the respective DORs (if Sergey's BIOS does this) What's …
Re: What are the best Vga to hdmi scalers or peripherals for MS-DOS games ?
Posted on 2022-06-30, 20:02
NyLan wrote on 2022-06-30, 18:46: Well, I need something that will output at 60Hz no matter the input Hz is ( like 70Hz in MS-DOS ) and at least scale to min 800x600 I ordered a RGB-HDMI 300 A but I'm not even sure it will do the job I need - even if I think it's something simple - It will do …
Re: Yet another 286 build.
Posted on 2022-06-30, 19:20
Ahh yeah I've had spotty results with those UMC multi IO cards on early motherboards
Re: Adlib Card - Clone / Real? Audio quality?
Posted on 2022-06-30, 16:05
IMO preemptively replacing tantalums (especially on a sound card) is simply a waste of time Even on the IBM motherboards notorious for blowing them it only happens on the +-12V rails
Re: Restoring a small form factor 486
Posted on 2022-06-30, 13:41
I run my DX33 with no cooling at all and it's fine. L2 cache makes a BIG difference
Re: Yet another 286 build.
Posted on 2022-06-30, 13:40
What is a "fancard"
Re: Longshine LCS-6610F floppy controller (For 4 floppy build)
Posted on 2022-06-30, 13:15
All good thoughts, thank you. Sergey's BIOS does seem to support a 2nd floppy controller, according to the documentation. I had a little play this more and made some progress. I had to hex edit the values in as for some reason the config utility can't write to the EEPROM, but the photo below shows …
Re: Longshine LCS-6610F floppy controller (For 4 floppy build)
Posted on 2022-06-30, 02:02
Thanks. I'm hoping if I can get the drives picked up by a BIOS, then getting DOS to see them should be easy. I've just come across Sergey Kiselev's floppy BIOS, which I'll give a try when I'm home from work. Cheers Andrew To the best of my knowledge no option ROM (including S. Kiselev's) exists …
Re: Longshine LCS-6610F floppy controller (For 4 floppy build)
Posted on 2022-06-30, 02:00
The BIOS on that card does not override the jumpers. It reads from them at startup. However, the BIOS on that card also requires that it be set as the primary FDC. If you wish to use it as a secondary FDC you must use the main system BIOS to control the primary FDC and disable the LCS ROM. Then to …
Re: Adlib Card - Clone / Real? Audio quality?
Posted on 2022-06-30, 01:54
Use it. It's period correct for your 286 and does have a unique sound
Re: Help me choose compatible 30-pin SIMM memory for a 486
Posted on 2022-06-30, 01:51
Not really, just don't loike em simple as I think the "Don't let your bike seat ruin your SEX LIFE" book ad is bad enough to avoid Stason like the plague :stuck_out_tongue: I think those ads base themselves off your browsing history, good sir... ;) They don't we all see that same bullshit
Page 48 of 169