You have the answer on the first photo (second image) of your link. Value 16 ohm and the size seems to be 1210

The 4 screws are plastic or metallic ?

OK, finally i have this motherboard recovered. For information, I received it in the state it was at the beginning : missing the power inductor, 3.3v regulator, a double diode, transistor, some capacitors, 14.318 Mhz crystal,battery holder and 2 inductors near the keyboard connector. For Q9, i used …

Hi, First thing to do : test the motherboard with a know good power supply. If there is no boot, verify with a multimeter on resistance all this pins (3.3V, 5V, 12V, -5V, -12V) on connector to ground (ATX connector) see figure. Important : Connector of the ATX power supply disconected from the …

Found it ! This is a HRW1002A, i don´t know the differences for the HRW1002C... But your problem is not this component, you need to see the transistor next it... Good luck

This is a double diode from Hitachi. If i find the datasheet, i post here...

Hey SDumas, I saw the notifications of quoting me in the other topic. Happy to help, here goes: Transistor Q9 = EZ1083CT Transistor Q8 = NDP603AL Double diode D7 = BYV118 4 capacitors - are all 1500uF/6.3V - Correct, mine have Sanyo's and are in good working order. Power inductor - how many turns = …

Restoring the Highscreen AT with original parts, so the FIC VA-502 came in with only a few bent jumper pins. Within days, the mighty (read: slow) Quantum Bigfoot will whir and rattle once again... Hi PD2JK, i see you have this motherboard (VA-502 pcb v1.1), could you please take a look on this …

I've got this model listed in the ancient scrolls (Scribbles on notepads 15+ years old) but it's also on the "ain't seen it recently" list, so I am unsure if I still have one or whether it went into a build I gave away when I could still make it fast enough to be a useful surfer/office box. So it …

Q9 is probably something like an LM317 to give 3.3V, maybe with a higher current rating though. Nearby resistors 2k and 1.2k would give Vout=1.25*(1+20/12)=3.33 X2 crystal (top left of CPU socket, by the ICS clock chip) is also missing. Hi Snufkin, well spotted the missing X2 crystal, this is a 14, …

And photos of the motherboard...

Hi all Vogons members ! hope you can help me... I have this motherboard with missing components, look at the photo.This photo is from user Hi PD2JK posted on "Bought these (retro) hardware today" topic. In the upper right side : Transistor Q9 (need reference print on it) In the lower right side : …

I have a mysterious problem with my UC4913 ver2.0 486 motherboard when using a DX4 (it's fine with DX2)... Maybe there is an opportunity to take a bios dump? I only found 1.0, although I know there is 1.4, but it is not read correctly and does not work (on win3x.org) I have this motherboard. Here …

Philips P3345 ?

This printings is not "this can do...", rather it is listing of details for each model to save you from searching or calling some body else for the settings to input into the computer. The true model # is somewhere else on the hard drive. In this case usually a sticker on the IDE connector or …

I believe you are mistaken. It's only they had a single label, and a single manual, for the whole series of hard-drives and capacities, and offered the C/H/S settings on the label for convenience. correct This is the label with correct capacity on quantum drives. The label on top is for information …

Hi ! I have this pdf file, but it is in French, hope that helps you... SDumas