Re: Netbios support patch
Posted on 2006-02-17, 17:16
Ykhwong's build also has this patch included. Netbios can be loaded on plain CVS but will refuse to work properly.
Re: Desperately looking for Hi Octane Network Patch
Posted on 2006-02-17, 16:02
Yes it only shows the options if netbios present. Native IPX support Netbios support patch
Re: Direct serial port working
Posted on 2006-02-15, 20:32
Oh, ok, just found out I can do better than that...
Re: Dongles?? PCAD, PSAVE
Posted on 2006-02-14, 22:39
Sorry, the highest resolution I ever used is 800x600. Windows shouldn't crash (dosbox doesn't load drivers, it only uses them), and there is always the fullscreen option.
Re: Dongles?? PCAD, PSAVE
Posted on 2006-02-14, 21:53
My suspicion is a bug in dosbox 0.63: at startup the bios code looked for serial ports before those were activated resulting in the bios table reporting no port base addresses. But since I don't bother to check this suspicion is likely to be wrong. For speed try dynamic core and ctrl+f12. You may be …
Re: Dongles?? PCAD, PSAVE
Posted on 2006-02-14, 20:47
There is some key combination to give you back the mouse ctrl + Fsomething - readme. I use alt+tab for that. (I used my own CVS build - and yes, the kezboard was the only choice left for the circle 😀)
Re: Dongles?? PCAD, PSAVE
Posted on 2006-02-14, 20:13
Looks like it works in CVS? Or can I draw a circle without psave? When I tried it hung. No DOS booting, plain dosbox. I didn't need to switch the directserial on, the serial dummy is seems to be sufficient. Mouse doesn't work.
Re: Dongles?? PCAD, PSAVE
Posted on 2006-02-14, 19:51
> CreateFile failed with error 5. This should mean the com port is already in use. Try the unofficial test build and it will give you a better error message :) Besides, maybe the driver file needs to find a com port in the first place to work, even with the psave TSR. In 0.63 this is, depending on …
Re: Dongles?? PCAD, PSAVE
Posted on 2006-02-12, 22:38
You could also try a CVS version of Dosbox.
Re: Dongles?? PCAD, PSAVE
Posted on 2006-02-11, 18:36
It does something with a PCADDRV.SYS. Is this file loaded in config.sys on a dos machine?
Re: "emm386 d=64" in DOSBox (Big Red Adventure)
Posted on 2006-02-10, 00:38
I've changed dos_memseg (and the check, too) to e000 but emm386 still complains.
Re: "emm386 d=64" in DOSBox (Big Red Adventure)
Posted on 2006-02-09, 15:59
or even better F000? Since most of it seems to be empty...
Re: Calling IPX from Program
Posted on 2006-02-07, 16:48
You must switch RTS on.
Re: "emm386 d=64" in DOSBox (Big Red Adventure)
Posted on 2006-02-05, 23:31
Sample usage of a harddisc image in DOSBOX
Re: Calling IPX from Program
Posted on 2006-02-05, 13:42
Here is an explanation of CVS and also links to compiled binaries. http://www.vogons.org/viewtopic.php?t=9306 Your ipxbad worked for me without crashing in CVS. (esrcalled:2) In 0.63 you need to save some CPU registers in your ESR routine (tose that are not already saved). But that might not be the …
Re: Calling IPX from Program
Posted on 2006-02-04, 14:56
Are you using 0.63? If so I suggest you use CVS, it has some fixes especially concerning the ESR routine. I also have a patch where I try to make as many games work wit IPX as possible. Native IPX support
Re: How to make Ctrl-Arrow UP and CTRL-arrow down cursor up/down keys working.
Posted on 2006-02-03, 16:33
The serial port has new config strings in CVS. [serial] serial1=directserial realport:com1
Re: Calling IPX from Program
Posted on 2006-02-03, 10:47
Yes. But have a look at ipx.cpp since not all functions are emulated.
Re: MODEM HELP
Posted on 2006-02-01, 19:48
Get a CVS build and type serial1 directserial realport:com5 at the command prompt. Tell your DOS application to use COM1.
Re: Death rally multiplayer problem.
Posted on 2006-01-31, 23:13
Look here: Re: Native IPX support
Page 189 of 198