First post, by RobDos
Now begins a new adventure, this one I'm taking my time on. The last system I built took about 7 months and it's still not done so I expect this to take me a while.
What I have so far:
Baby AT Mainboard, M915I or 80486VIP haven't yet confirmed which
https://www.elhvb.com/webhq/models/486pci/80486vip.html
It seems to have LBA with a 8GB limit, it's odd because the BIOS only has primary master/slave yet the board list secondary, looking at the traces most run to the 'primary' and it makes me wonder if the two onboard IDE ports are actually master/slave and meant to look like 'dual channel'- I'll have to test this out.
Generic 40 Pin Female IDE to SD card adapter
https://www.soarland.com/40-Pin_Female_IDE_To … roduct-227.html
Intel P24D 80486 DX2 66Mhz, HSF appears to be epoxied to CPU
2x 4MB , 1x8MB FP SIMM MEMORY
DIY PC D480W-W-RGB ATX Mid Tower Case, 2x 5.25" Bays
Sound Blaster 16 CT2910 ISA
S3 Trio64V+ 4MB PCI Graphics card
On order/waiting for it to arrive:
QD6500A 2.0 Vesa Local Bus multi IO controller.
1x 64K x 8 BIT SRAM DIP-32 + 8x 128K x 8 SRAM DIP-32
Due to limited space I am not sure how to address floppy, I would like a 5.25" but that means I need a expensive dual floppy to fit in this case with a CD rom.
I'm looking for inspiration, ideas and tips.
P3 Slot 1 - 512MB PC100 - 128GB SSD - RADEON 9200 SE , SB Awe64 ISA - GOTEK MOD