Maxi Magic EMS EV-165A Question \ VOGONS

Maxi Magic EMS EV-165A Question

Topic actions

Post a reply

First post, by thierry

Posted on 2013-05-20, 01:06

thierry Offline

Rank Newbie

Rank: Newbie
Posts: 97
Joined: 2013-05-14, 20:31
Location: Argentina

Hello people, this is my first post, then I stand properly and I hope to contribute to the community, I have a question, I got this board, the Magic MAxi EMS EV-165A, its very difficult to find the drivers on the internet, my question is whether it is possible to use another from other cards , for example Everex RAM 3000 that card if I have at home and with the drivers, my idea is to use the EV-165A in a 8088 XT , from already thank you ..

im search for this one

https://th99.infania.net/i/E-H/52637.htm

https://stason.org/TULARC/pc/memory-cards/EVE … C-EMS-EV-1.html

Best Regards

From Argentina

Thierry

Last edited by thierry on 2021-07-04, 05:28. Edited 4 times in total.

Reply 1 of 9, by thierry

Posted on 2013-05-24, 02:54

thierry Offline

Rank Newbie

Rank: Newbie
Posts: 97
Joined: 2013-05-14, 20:31
Location: Argentina

Bump !

Reply 2 of 9, by thierry

Posted on 2015-04-27, 03:33

thierry Offline

Rank Newbie

Rank: Newbie
Posts: 97
Joined: 2013-05-14, 20:31
Location: Argentina

I found it , i think is useful to someone, thank "ur99ru" for sending me an email and kindly share the file to run the card

Link :

http://www.mediafire.com/download/qj41f156a7x77i5/ev165.zip

Reply 3 of 9, by vetz

Posted on 2015-04-27, 07:44

vetz Offline

Rank l33t

Rank: l33t
Posts: 4152
Joined: 2012-04-23, 17:13

Nice, attached it to vogons incase mediafire link goes down.

Attachments

Filename

ev165.zip

File size

141 KiB

Downloads

96 downloads

File license

Fair use/fair dealing exception

3D Accelerated Games List (Proprietary APIs - No 3DFX/Direct3D)
3D Acceleration Comparison Episodes

Reply 4 of 9, by perhenden

Posted on 2020-12-05, 13:51

perhenden Offline

Rank Member

Rank: Member
Posts: 131
Joined: 2020-04-11, 13:34
Location: Oslo, Norway

I've uploaded a newer version of the driver, 4.0.1, to Vogondrivers,
can someone please try it out? I found the driver on an old harddrive, but don't have an Everex EMS card to test with (any more).
http://www.vogonsdrivers.com/getfile.php?fileid=1749

(Also, I uploaded the version previously mentioned here, 3.22 to Vogondrivers).

Reply 5 of 9, by rubg

Posted on 2021-05-12, 10:14

rubg Offline

Rank Newbie

Rank: Newbie
Posts: 1
Joined: 2021-05-12, 09:41

Hi, I have two questions, about the Everex EV-165A board I recently bought, with mixed speed memories:
1) Do you have a PDF manual for this card: Maxi Magic EMS EV-165A in PDF format? That RAM 3000 has references to this card but I wanted to check the jumper settings and the part on the memories. I found this link, for the setup, but I would like to be sure :
https://stason.org/TULARC/pc/memory-cards/EVE … C-EMS-EV-1.html
2) Is the speed of the memory chips recommended (in the manual) or present on your card 120ns or 100ns? Also the recommended chips are NEC ones?
Thank you, best regards
Guido

Reply 6 of 9, by thierry

Posted on 2021-07-04, 05:22

thierry Offline

Rank Newbie

Rank: Newbie
Posts: 97
Joined: 2013-05-14, 20:31
Location: Argentina

rubg wrote on 2021-05-12, 10:14:
Hi, I have two questions, about the Everex EV-165A board I recently bought, with mixed speed memories: 1) Do you have a PDF manu […]
Show full quote

Hi, I have two questions, about the Everex EV-165A board I recently bought, with mixed speed memories:
1) Do you have a PDF manual for this card: Maxi Magic EMS EV-165A in PDF format? That RAM 3000 has references to this card but I wanted to check the jumper settings and the part on the memories. I found this link, for the setup, but I would like to be sure :
https://stason.org/TULARC/pc/memory-cards/EVE … C-EMS-EV-1.html
2) Is the speed of the memory chips recommended (in the manual) or present on your card 120ns or 100ns? Also the recommended chips are NEC ones?
Thank you, best regards
Guido

Im looking for the manual too , its hard to find, My card has these memories

Reply 7 of 9, by thierry

Posted on 2021-07-04, 05:53

thierry Offline

Rank Newbie

Rank: Newbie
Posts: 97
Joined: 2013-05-14, 20:31
Location: Argentina

First time in 10 years that I see the manual in English, if it weren't for how restrictive it is to buy in my country I would get it and scan it

https://www.ebay.com/itm/133607459141?_trkpar … 8.c101113.m2108

Reply 8 of 9, by thierry

Posted on 2021-07-04, 06:00

thierry Offline

Rank Newbie

Rank: Newbie
Posts: 97
Joined: 2013-05-14, 20:31
Location: Argentina

perhenden wrote on 2020-12-05, 13:51:
I've uploaded a newer version of the driver, 4.0.1, to Vogondrivers, can someone please try it out? I found the driver on an ol […]
Show full quote

I've uploaded a newer version of the driver, 4.0.1, to Vogondrivers,
can someone please try it out? I found the driver on an old harddrive, but don't have an Everex EMS card to test with (any more).
http://www.vogonsdrivers.com/getfile.php?fileid=1749

(Also, I uploaded the version previously mentioned here, 3.22 to Vogondrivers).

Testing very very soon

Reply 9 of 9, by thierry

Posted on 2021-07-05, 17:45

thierry Offline

Rank Newbie

Rank: Newbie
Posts: 97
Joined: 2013-05-14, 20:31
Location: Argentina

perhenden wrote on 2020-12-05, 13:51:
I've uploaded a newer version of the driver, 4.0.1, to Vogondrivers, can someone please try it out? I found the driver on an ol […]
Show full quote

I've uploaded a newer version of the driver, 4.0.1, to Vogondrivers,
can someone please try it out? I found the driver on an old harddrive, but don't have an Everex EMS card to test with (any more).
http://www.vogonsdrivers.com/getfile.php?fileid=1749

(Also, I uploaded the version previously mentioned here, 3.22 to Vogondrivers).

Its workss

Go to top of page Go to top of page

Back to General Old Hardware

Main menu

Common searches