First post, by y2k se
I have a system running on an ASUS P2B (440BX chipset). Connected to the primary IDE channel is a Western Digital 80 GB hard drive. I have DOS 6.22/WfW 3.11 and Windows 98 SE dual-booting. I currently use Clonezilla to image/restore the drive to a network share.
I acquired a second Western Digital 80 GB drive and wanted to setup a RAID 0 array using a Highpoint RocketRaid 404 controller. However, Clonezilla is not able to see the RAID array on the controller, so I'm not able to restore a image to the array. Also, I would not be able to backup the array.
Is anyone aware of alternative software that would be able to see the RAID array? It would also need to support imaging a drive to a network share or CD-R (the machine has a CDRW drive installed).
Tualatin Celeron 1.4, ASUS P2B, 512 MB, GeForce 3 Ti 200, Voodoo2 SLI, AWE64, WD 80GB SE HDD, Dell 2007FP