VOGONS


First post, by undeon

User metadata
Rank Newbie
Rank
Newbie

Hi everyone,

I've posted a few days about my little protect.

Abit AN7
Athlon XP 2200+ (3200+ on the way)
2x512 DDR400 (2X1GB low latency someday)
Radeon HD 4650 AGP

To power this system I'm using a Corsair CX430 (20A at 5V, the minimal recommended on the manual).

After assembly it, the system started fine and I run memtest86. The memory was OK. Then I removed the Radeon to install a hard drive and the system won't post anymore. The motherboard lcd stops at 25:

Early PCI Initialization:
-Enumerate PCI bus number.
-Assign memory & I/O resource
-Search for a valid VGA device & VGA BIOS, and put it into C000:0

I reseted the bios and tried with a 500W psu (22A on 5V), but without success.

With a Radeon 9600xt happened the same thing, but after a bios reset it worked fine.

I need help because I really want to keep this vga.

Thanks in advance