VOGONS


Reply 300 of 392, by root42

User metadata
Rank Oldbie
Rank
Oldbie
LABS wrote:

Just received a fresh batch of PCBs

They managed to put the batch number in the right spot! 😀

Soldering, retro game reviews and more on YouTube and Bonus videos
80386DX@25 MHz, 8 MiB RAM, Tseng ET4000 1 MiB, Jazz16, PC MIDI Card + SC55MkII + MT32, XT CF Lite, OSSC 1.6

Reply 301 of 392, by LABS

User metadata
Rank Member
Rank
Member

Yes, I wrote earlier that they recently added a separate option for that on the order page, so looks like it is working now.

BLASTERBOARD: a DIY SB2.0-compatible sound card on ATmega328P microcontroller

Reply 302 of 392, by canthearu

User metadata
Rank Oldbie
Rank
Oldbie
LABS wrote:

Just received a fresh batch of PCBs

IMG_0932.JPG

However, still upgrading the firmware, which will take some time.

We will be able to get that as a download right? Of course, we will need to do it in an EEPROM programmer.

Reply 303 of 392, by MJay99

User metadata
Rank Newbie
Rank
Newbie
canthearu wrote:

We will be able to get that as a download right? Of course, we will need to do it in an EEPROM programmer.

That would indeed be great - curious about the changes already 😀

Reply 304 of 392, by LABS

User metadata
Rank Member
Rank
Member
MJay99 wrote:
canthearu wrote:

We will be able to get that as a download right? Of course, we will need to do it in an EEPROM programmer.

That would indeed be great - curious about the changes already 😀

Sure, the compiled firmware will be available for download in intel hex format

BLASTERBOARD: a DIY SB2.0-compatible sound card on ATmega328P microcontroller

Reply 305 of 392, by LABS

User metadata
Rank Member
Rank
Member

Almost finished with the firmware - had to rewrite a lot from scratch.
Still testing, but BlasterBoard is running Triton's Crystal Dream on my P166MMX now.

IMG_0937.JPG
Filename
IMG_0937.JPG
File size
84.29 KiB
Views
514 views
File license
Fair use/fair dealing exception
IMG_0940.JPG
Filename
IMG_0940.JPG
File size
101.32 KiB
Views
514 views
File license
Fair use/fair dealing exception

BLASTERBOARD: a DIY SB2.0-compatible sound card on ATmega328P microcontroller

Reply 308 of 392, by keropi

User metadata
Rank l33t++
Rank
l33t++
LABS wrote:

Oh yes, and Alone in the Dark in DMA mode as well 😈

music to my ears 🤣 🤣 🤣 🤣
excellent work again LABS!

cT89QGt.gif Amstrad PC7486SLC-33 wanted , click me for AmiBay ad!

Reply 309 of 392, by root42

User metadata
Rank Oldbie
Rank
Oldbie

Crosspost from the ModMaster thread:

Back from vacation and now I could test out ModMaster XT build 9. Here is the Pinball Fantasies intro, Steelchambers 2:

https://youtu.be/9fbGwKakdgM

Sounds quite good I think. I do not think I need more than 44 KHz, however the 8bit output leads to quantization noise I think. This won't go away with higher mixing frequency, I think. The software is getting more and more impressive. Now we need to make the whole software more well rounded. e.g. 43/50 line mode, showing of up to 8 channels or so (I can only ever see the first four).

Bonus: Adrenaline (Pinball Fantasies menu music):

https://youtu.be/Hw-jEB8G_8k

Space Debris at 62KHz: https://youtu.be/WX8_8ZHSxfw

Better than I expected. Still some quantization noise can be heard, but incredibly well sounding for an 8 bit card!

Soldering, retro game reviews and more on YouTube and Bonus videos
80386DX@25 MHz, 8 MiB RAM, Tseng ET4000 1 MiB, Jazz16, PC MIDI Card + SC55MkII + MT32, XT CF Lite, OSSC 1.6

Reply 310 of 392, by matze79

User metadata
Rank Oldbie
Rank
Oldbie

Hi,

finally had time to solder it.. but i don`t get it detected as SB,
Adlib works just fine.

Checked for solder bridges etc. and found nothing 😒
ICs are correctly in position too 😒

Any Ideas what i should check first ?

https://dosreloaded.de - The German Retro DOS PC Community
https://www.retroianer.de - under constructing since ever

Reply 311 of 392, by root42

User metadata
Rank Oldbie
Rank
Oldbie

Did you set the BLASTER environment variable? Shouldn’t be necessary with all programs... is the ATMEL ok? That would be one likely culprit.

Soldering, retro game reviews and more on YouTube and Bonus videos
80386DX@25 MHz, 8 MiB RAM, Tseng ET4000 1 MiB, Jazz16, PC MIDI Card + SC55MkII + MT32, XT CF Lite, OSSC 1.6

Reply 312 of 392, by matze79

User metadata
Rank Oldbie
Rank
Oldbie

https://www.retroianer.de/blasterboard/

Have uploaded some Pictures but i can`t see any mistake yet..
As said OPL2 is working fine and its a pleasure to listen to it with headphones 😀

the atmel contains something and fusebit is set for external clock.
Whats PB1 Pin for ? are there debug messages on it ?

https://dosreloaded.de - The German Retro DOS PC Community
https://www.retroianer.de - under constructing since ever

Reply 313 of 392, by MJay99

User metadata
Rank Newbie
Rank
Newbie

I can see a few pins where solder seems to at least touch the surrounding ground plane's solder mask (e.g. at the ATMEL socket, but also in other places). There might be ground connections, if the thin soldermask is damaged underneath. Maybe you can try and check those pins carefully, if there is anything shorted. During soldering I had to take extra care on this PCB because the space between the solderpads and surrounding ground is very thin and the soldermask seemed more fragile than on other PCBs I had before. HIH.

Reply 316 of 392, by root42

User metadata
Rank Oldbie
Rank
Oldbie
matze79 wrote:
Show quote

https://www.retroianer.de/blasterboard/

Have uploaded some Pictures but i can`t see any mistake yet..
As said OPL2 is working fine and its a pleasure to listen to it with headphones 😀

the atmel contains something and fusebit is set for external clock.
Whats PB1 Pin for ? are there debug messages on it ?

Is this a bridge to that via?

026E3FB7-CDAD-4FB5-A788-20DE2F6D9BD3.jpeg
Filename
026E3FB7-CDAD-4FB5-A788-20DE2F6D9BD3.jpeg
File size
181.86 KiB
Views
197 views
File license
Fair use/fair dealing exception

Soldering, retro game reviews and more on YouTube and Bonus videos
80386DX@25 MHz, 8 MiB RAM, Tseng ET4000 1 MiB, Jazz16, PC MIDI Card + SC55MkII + MT32, XT CF Lite, OSSC 1.6

Reply 317 of 392, by appiah4

User metadata
Rank l33t
Rank
l33t

Zing!

A500:Rev6|+512K|ACA500+|C1084S
i386:Am386SX25|4M|GD5402|ES688
i486:U5S33|8M|GD5428|YMF719
i586:P133|32M|T64V+/MX2|V1|CT3980/32M
i686:K6-2/500|256M|i740|V2/SLI|CT4520/32M
S370:P3-1200|384M|GF4-4200|MX300
S754:A3700+|2G|X800XTPE|SB0350

Reply 318 of 392, by matze79

User metadata
Rank Oldbie
Rank
Oldbie

just looks like, but isnt.

Its above the VIA.

https://dosreloaded.de - The German Retro DOS PC Community
https://www.retroianer.de - under constructing since ever

Reply 319 of 392, by matze79

User metadata
Rank Oldbie
Rank
Oldbie

hm i suspect something other.. i wish i used sockets for all ics..

i can not find a unwanted ground connection checked every connection now..

Maybe Labs can give some Debug Information..
Without a Schematic its bit hard to guess which IC is deaf..
Is there some debug code on the atmega328p ? i

🆒The PB1 pin of the atmega is routed to H6 header now, it can be used for firmware debugging etc.

What sort of debugging interface ? TTL TX ?

https://dosreloaded.de - The German Retro DOS PC Community
https://www.retroianer.de - under constructing since ever