First post, by Nemo1985
Hello, I recently received my second V2, sold as non working, but it proved to work, somewhat...
I noticed it had some issues starting from 3dmark99, during the second test, called fps sometimes the color goes nuts, some other times everything is fine, I also noticed that when it had issues with the second test, it also has issues with mimap testing and the third\fourth 3dmark99 test, while the others are fine, also sometimes the screen gets full white while loading for the next test.
When the card works fine (1 every 2-3 times I reboot the system), it is slower in some tests (texture rendering speed).
The sli benchmark shows no real advantage over the single v2, despite using a p2 400 mhz it should show some improvements I suppose.
My idea is that a tmu is bad, to be precise the one near the sli connector, the card it self it's in a very good condition (better than one which works), there is one pin that seems bent but it isn't touching anything else.
I also did the mojo debug test apparently it shows no issues with the faulty v2 but it gives some errors with the one which is working.
I've uploaded all the pictures, benchmark results and a video showing the issue on my gdrive link to download: https://drive.google.com/open?id=1dBwhqJyrhoU … hzlwlwVulqgnoQe
Any help is appreciated.