First post, by GunKneeNeon
I have a Trident TVGA 9000c ISA video card and I use an AOC MW19N-AA 932Sw LCD monitor. My 9000c has 512kb memory, it support the resolution of 800x600 with 256 color mode. But my LCD refuse to accept the output from my video card. When set the resolution in windows, the LCD became black screen with error "Input not supported". I have another PCI video card, which is a S3Trio64V+. The LCD displays in 800x600 256 color mode with the card perfectly fine. So what would be the issue the 9000c has? Is it the refresh rate 9000c output that is non-standard? I have no way of finding the output refresh rate when the screen is black. However, when I set the resolution to 640x480 256 color, my LCD works in 60hz.
This is my current jumper settings:
AVT 586 GX LITE V2 | Cyrix MediaGX GX-166BP | 4MBx2 EDO RAM + 4MBx2 FastPage RAM | WDAC1210-21F 210MB 3300rpm | Trident TVGA 9000C | Acer Magic V1 | Sunflower YMF-724 | DataLink Realtek RTL8139D | TECHMEDIA TFD-310 | Goldstar／LG Electronics GCD-R542B