mwdmeyer wrote on 2021-01-16, 23:25:

Yeah it some crazy russian guy called Anthony who is making them. This isn't even the most impressive card he has made. He has S […]
Show full quote

stoof wrote on 2021-01-16, 15:51:

OK hol' up, are we just going to let this one slip by without more people freaking out? […]
Show full quote

mwdmeyer wrote on 2021-01-16, 06:44:

I did a very expensive thing. Looking forward to it!

OK hol' up, are we just going to let this one slip by without more people freaking out?

This is a brand new 3dfx VSA-100-based video card with hdmi out! Super cool!

If the existance of this card is common knowledge, then I guess I'm late for the party. 😀

Yeah it some crazy russian guy called Anthony who is making them. This isn't even the most impressive card he has made. He has SLI Voodoo 1s and 2s on a single board. AGP 1.5v Voodoo 5s and some other crazy things.

All very custom and low quantities. Very expensive but if you are in to that thing very cool.

You can see more here: https://www.facebook.com/zxc64.hw

I will probably take a couple of months to arrive.

So cool. Stuff like this is one of few things I would consider bringing out the big wallet for. Please keep us informed when it arrives!

pentiumspeed wrote on 2021-01-17, 04:12:

How do you call these miniature folding knifes by what name?

I'd call that a penknife. So called because it was only used for small tasks such as sharpening a pencil or indeed removing splinters.

mwdmeyer wrote on 2021-01-16, 23:25:

Yeah it some crazy russian guy called Anthony who is making them. This isn't even the most impressive card he has made. He has S […]
Show full quote

stoof wrote on 2021-01-16, 15:51:

OK hol' up, are we just going to let this one slip by without more people freaking out? […]
Show full quote

mwdmeyer wrote on 2021-01-16, 06:44:

I did a very expensive thing. Looking forward to it!

OK hol' up, are we just going to let this one slip by without more people freaking out?

This is a brand new 3dfx VSA-100-based video card with hdmi out! Super cool!

If the existance of this card is common knowledge, then I guess I'm late for the party. 😀

Yeah it some crazy russian guy called Anthony who is making them. This isn't even the most impressive card he has made. He has SLI Voodoo 1s and 2s on a single board. AGP 1.5v Voodoo 5s and some other crazy things.

All very custom and low quantities. Very expensive but if you are in to that thing very cool.

You can see more here: https://www.facebook.com/zxc64.hw

I will probably take a couple of months to arrive.

Wow! Someone should suggest to this guy to make a proper Facebook page instead of putting this stuff on his personal page - I'd totally give it a Like and a Follow 😀

Stiletto wrote on 2021-01-18, 00:39:

mwdmeyer wrote on 2021-01-16, 23:25:

Yeah it some crazy russian guy called Anthony who is making them. This isn't even the most impressive card he has made. He has S […]
Show full quote

stoof wrote on 2021-01-16, 15:51:

OK hol' up, are we just going to let this one slip by without more people freaking out?

This is a brand new 3dfx VSA-100-based video card with hdmi out! Super cool!

If the existance of this card is common knowledge, then I guess I'm late for the party. 😀

Yeah it some crazy russian guy called Anthony who is making them. This isn't even the most impressive card he has made. He has SLI Voodoo 1s and 2s on a single board. AGP 1.5v Voodoo 5s and some other crazy things.

All very custom and low quantities. Very expensive but if you are in to that thing very cool.

You can see more here: https://www.facebook.com/zxc64.hw

I will probably take a couple of months to arrive.

Wow! Someone should suggest to this guy to make a proper Facebook page instead of putting this stuff on his personal page - I'd totally give it a Like and a Follow 😀

Yeah people have asked for a store page or something so they can more easily see pricing and purchase. I think it is completely a hobby for him and you know with hobbies if you make them into jobs they aren't the same anymore.....

mwdmeyer wrote on 2021-01-18, 00:49:

Stiletto wrote on 2021-01-18, 00:39:

mwdmeyer wrote on 2021-01-16, 23:25:

Yeah it some crazy russian guy called Anthony who is making them. This isn't even the most impressive card he has made. He has S […]
Show full quote

Yeah it some crazy russian guy called Anthony who is making them. This isn't even the most impressive card he has made. He has SLI Voodoo 1s and 2s on a single board. AGP 1.5v Voodoo 5s and some other crazy things.

All very custom and low quantities. Very expensive but if you are in to that thing very cool.

You can see more here: https://www.facebook.com/zxc64.hw

I will probably take a couple of months to arrive.

Wow! Someone should suggest to this guy to make a proper Facebook page instead of putting this stuff on his personal page - I'd totally give it a Like and a Follow 😀

Yeah people have asked for a store page or something so they can more easily see pricing and purchase. I think it is completely a hobby for him and you know with hobbies if you make them into jobs they aren't the same anymore.....

Eh, I know plenty of hobbyists with Facebook, Twitter, Instagram... oh well, I'm getting off-topic anyhow. All that aside, it's very cool to see what he's done here.

Yesterday I went and got this lot:

From one location I got:

-Two 1.8 GHz Pentium 4 towers (luckily this time I don't have to recap) with 20-30 GB hdds and 384 Mb RAM as well as radeon 7000 AGP cards
-One PIII 450 (labelled "for parts" but with a bit of tinkering, brought back to life)

ASUS P3V133 board, 192 Mb RAM, 13 gb HDD - Loaded Win 98SE on it already
-4 LCD monitors
-Keyboards and mice
-One Socket 7 TX chipset with a Cyrix MII (IIRC) CPU - unfortunately, this board shows no signs of life. I will have to take it out of there to inspect it further (changed CPU and swapped out to EDO RAM - still -- -- on the PC analyzer) but one voltage regulator has discoloured the board noticeably. 3V is being outputted from there. The case is very yellowed and I will need to repaint the case cover as it is rusty. Worst case my 486 DX2/66 SCSI build will go in there.

From another location I got two SCSI cdroms - a Nakamichi 5 disc changer, and a Pioneer 32x SCSI (for the above mentioned 486 SCSI build) - That Nakamichi cost me more than half of what I paid for the whole 1st lot.

Basically this:

I have one of those cases with the translucent blue swoosh on it too! It has a Socket A VIA VT600 board in it that needs a MOSFET replaced and probably also recapping...

Yeah there were a few things wrong with the system inside - bad RAM, no video, incorrectly set up master/slave drives, and the CPU fan was making a lot of noise. Not very hard fixes, but I will need to retrobrite the case, it's pretty yellowed.

I'll turn my attention to that TX chipset board next though. I'd love to get that one going above all.

Repo Man11 wrote on 2021-01-10, 20:33:

For $30.00 and a long drive, I purchased four motherboards, two cases, and three video cards. Two Aopen boards, both of which are interesting; one is a Pentium M board, the other is a Pentium 4 775 AGP board. And a pair of industrial Pentium 4 boards. I've tested three of the four boards so far and they have all POSTed. And the video cards are PCI Radeon 7000 64 meg DDR cards. The one P4 board has a 3.0 with hyperthreading CPU, and I'm guessing the other does as well. The only auctions I could find on Ebay for the Socket 478 boards were ridiculously overpriced. And the Pentium M MATX board is apparently so rare that I couldn't find a listing to give me any idea of what it might be worth.

For testing purposes I installed Windows XP on the Aopen i855GMEm-LFS, and it worked fine. It didn't have a floppy drive, so I cheated and used a SATA to IDE adapter and installed XP that way. I installed the SATA driver after, and tested the drive speed both ways; Crystaldisk showed about 85 MB/s with a Seagate drive with the IDE adapter, and 101 through the SATA port. This also allowed me to test the beige IDE DVD ROM, which works fine. This is an added bonus since those are getting to be hard to come by.

EvieSigma wrote on 2021-01-18, 04:40:

I have one of those cases with the translucent blue swoosh on it too! It has a Socket A VIA VT600 board in it that needs a MOSFET replaced and probably also recapping...

I have the exact same case holding the FIC PA-2013 + K6-500 system in my signature. When it was given to me by a local radio station a few years ago it had some mid 2000s Athlon system in it and a rather uncommon Radeon HD 4350 AGP card, which I was happy about. That is the latest AGP card I own (with an HD 3850 and 7800GS right behind it).

Anyway, seems like a decent case. 😀

Nice job finding that lot!

mwdmeyer wrote on 2021-01-16, 23:25:

Yeah it some crazy russian guy called Anthony who is making them. This isn't even the most impressive card he has made. He has S […]
Show full quote

stoof wrote on 2021-01-16, 15:51:

OK hol' up, are we just going to let this one slip by without more people freaking out? […]
Show full quote

mwdmeyer wrote on 2021-01-16, 06:44:

I did a very expensive thing. Looking forward to it!

OK hol' up, are we just going to let this one slip by without more people freaking out?

This is a brand new 3dfx VSA-100-based video card with hdmi out! Super cool!

If the existance of this card is common knowledge, then I guess I'm late for the party. 😀

Yeah it some crazy russian guy called Anthony who is making them. This isn't even the most impressive card he has made. He has SLI Voodoo 1s and 2s on a single board. AGP 1.5v Voodoo 5s and some other crazy things.

All very custom and low quantities. Very expensive but if you are in to that thing very cool.

You can see more here: https://www.facebook.com/zxc64.hw

I will probably take a couple of months to arrive.

Wow, this guy makes some crazy cool stuff.

Man, I wish there was a single online shop where you could just buy all these awesome hardware that community members have created over the last couple of years. Sound cards, MIDI daughter boards, graphics cards, adapters and add-ons of all kinds...
But yeah, for most (if not all) of the people behind those projects, it's a hobby, and bringing their projects to a professional level would probably spoil the fun and yield quite a few problems (ensure supply, support, warranty, continuous enhancement, liability issues, etc.). Probably far beyond what any hobbyist would be willing or able to do at greater scale.
(I know of serdashop.com for example, but most projects never reach this level of professionalism, and of course no one can be blamed.)

gex85 wrote on 2021-01-18, 09:20:

Man, I wish there was a single online shop where you could just buy all these awesome hardware that community members have created over the last couple of years. Sound cards, MIDI daughter boards, graphics cards, adapters and add-ons of all kinds...
But yeah, for most (if not all) of the people behind those projects, it's a hobby, and bringing their projects to a professional level would probably spoil the fun and yield quite a few problems (ensure supply, support, warranty, continuous enhancement, liability issues, etc.). Probably far beyond what any hobbyist would be willing or able to do at greater scale.
(I know of serdashop.com for example, but most projects never reach this level of professionalism, and of course no one can be blamed.)

Not to mention the risk of violating copyright stuff?

[EDIT]: Reduced quote length

One of the final updates for the nforce 2 board. Perfectly stable with Prime 95 --- 50 something hours later. After I put the voltage at 1.75V as noted in last post.

Next, I might chuck windows xp on it and do 3d stability tests. have a ATI 9600xt to start with

Hooray, finally I've got a NOS ViewSonic E70fSB 16"/17" CRT monitor for small money 😀
... let's hope it works.
(had only some good TFTs to run my vintage rigs untill now)

I guess I will give my vintage VR Set (with shutter glasses) a try - and will probably get nausea 😉

ildonaldo wrote on 2021-01-18, 15:19:

Hooray, finally I've got a NOS ViewSonic E70fSB 16"/17" CRT monitor for small money :-) ... let's hope it works. (had only some […]
Show full quote

Hooray, finally I've got a NOS ViewSonic E70fSB 16"/17" CRT monitor for small money 😀
... let's hope it works.
(had only some good TFTs to run my vintage rigs untill now)
ViewSonic_E70fSB.jpg

I remember those being hit-or-miss. What's the dot pitch on that one?

Jed118 wrote on 2021-01-18, 16:01:

ildonaldo wrote on 2021-01-18, 15:19:

Hooray, finally I've got a NOS ViewSonic E70fSB 16"/17" CRT monitor for small money :-) ... let's hope it works. (had only some […]
Show full quote

Hooray, finally I've got a NOS ViewSonic E70fSB 16"/17" CRT monitor for small money 😀
... let's hope it works.
(had only some good TFTs to run my vintage rigs untill now)
ViewSonic_E70fSB.jpg

I remember those being hit-or-miss. What's the dot pitch on that one?

Looking at the box it shows .20mm horizontal and .25mm diagonal dot pitch

Someone quoted me on this thread, but when I clicked on the appriopriate URL on the motifications, the post seems to have gone.

ildonaldo wrote on 2021-01-18, 15:19:

Hooray, finally I've got a NOS ViewSonic E70fSB 16"/17" CRT monitor for small money :-) ... let's hope it works. (had only some […]
Show full quote

Hooray, finally I've got a NOS ViewSonic E70fSB 16"/17" CRT monitor for small money 😀
... let's hope it works.
(had only some good TFTs to run my vintage rigs untill now)
ViewSonic_E70fSB.jpg

I guess I will give my vintage VR Set (with shutter glasses) a try - and will probably get nausea 😉
Asus_VR.jpg

I had the E70f (beige version) back in the day. The best CRT I ever had, and probably one of the best CRT's I ever experienced.
Unrivalled dotpitch for 17". Made the mistake of replacing it with a larger 21" Triniton (SGI GDM5411) later, and regretted it.
It's a shame Viewsonic LCD's aren't very good. Their flat CRT's were some of the best, if not the best.

The mailman was finally here with something.... Guess what I will be doing tonight?

Kreshna Aryaguna Nurzaman wrote on 2021-01-18, 17:11:

Someone quoted me on this thread, but when I clicked on the appriopriate URL on the motifications, the post seems to have gone. […]
Show full quote

Someone quoted me on this thread, but when I clicked on the appriopriate URL on the motifications, the post seems to have gone.

That happens to me as well sometimes.

chrismeyer6 wrote on 2021-01-18, 16:25:

Jed118 wrote on 2021-01-18, 16:01:

ildonaldo wrote on 2021-01-18, 15:19:

Hooray, finally I've got a NOS ViewSonic E70fSB 16"/17" CRT monitor for small money :-) ... let's hope it works. (had only some […]
Show full quote

Hooray, finally I've got a NOS ViewSonic E70fSB 16"/17" CRT monitor for small money 😀
... let's hope it works.
(had only some good TFTs to run my vintage rigs untill now)
ViewSonic_E70fSB.jpg

I remember those being hit-or-miss. What's the dot pitch on that one?

Looking at the box it shows .20mm horizontal and .25mm diagonal dot pitch

AH yes, the good old clicking and zooming.

I had a 17 inch back in the day, there must have been something wrong with it because I don't recall it being very good, at least compared to my 21" DiamondScan and a 20" Samsung (I forget the model, this was 20 years ago) monitors from around the same time. A friend had a 15 inch Viewsonic and it also wasn't too impressive. The ones at the computer store I worked at were pretty crisp though. Weird.