VOGONS


Reply 20 of 23, by Carlos S. M.

User metadata
Rank Oldbie
Rank
Oldbie
Kahenraz wrote:

Nice find!

The AGP slot isn't keyed though. Any idea of its universal?

I believe so, all Intel 815 based motherboard has AGP universal slots

What is your biggest Pentium 4 Collection?
Socket 423/478 Motherboards with Universal AGP Slot
Socket 478 Motherboards with PCI-E Slots
LGA 775 Motherboards with AGP Slots
Experiences and thoughts with Socket 423 systems

Reply 21 of 23, by darry

User metadata
Rank l33t++
Rank
l33t++
Kahenraz wrote:

Nice find!

The AGP slot isn't keyed though. Any idea of its universal?

quote="Carlos S. M."]I believe so, all Intel 815 based motherboard has AGP universal slots[/quote]) .

"In order to match the 1X, 2X and 4X AGP card. The board used the Universal AGP connector. To maximize add-in flexibility. (such as 1.5 volts for 1X, 2X and 4X or 3.3 volts for 1X and 2X AGP card)"
according to the manual at http://www.aonecorp.co.kr/products/single/man … l/IP-3ETI23.pdf

This is a bit of a necro-post, but I just bought one thanks to the link in this thread (for some reason it does not always come up in searches on the auction site itself[

Reply 22 of 23, by Oldskoolmaniac

User metadata
Rank Oldbie
Rank
Oldbie

Get a BX board and toss this on it http://www.ebay.com/itm/Updating-/28193195765 … oQAAOSwWTRWuu99 when the seller is done updating these are $30 shipped.

Motherboard Reviews The Motherboard Thread
Plastic parts looking nasty and yellow try this Deyellowing Plastic

Reply 23 of 23, by darry

User metadata
Rank l33t++
Rank
l33t++
Oldskoolmaniac wrote:

Get a BX board and toss this on it http://www.ebay.com/itm/Updating-/28193195765 … oQAAOSwWTRWuu99 when the seller is done updating these are $30 shipped.

I already have a slot 1 BX board M6TBD with a PowerLeap PL-iP3/T and Tualeron 1300, but that only has two ISA slots, which is only enough for a GUS PNP and a CT3670 SB32 (DSP 4.16, so no hanging note, but with CQM). I want the extra ISA slot for a real OPL3 based board (got an Audiotrix 3D/XG lined up) . With prices for decent BX boards being rather high (not to mention their usual 2 ISA slot max) , that NOS 815EP based board with native Tualatin support looked like a great deal . I actually ordered an un-modded 1.4G Tualatin-S from the same guy in Korea (already have a 1.4G Tualatin-S with a broken pin, but that's another story in another thread) because prices everywhere else are crazy .

The perfectionism bug must have bitten me, because I have already put way too much money into this and my current BX-based setup was shaping up to be almost perfect, but I realized late in the game that I really do not like Creative's CQM, and did not want to sacrifice anything else, so that third ISA slot is a must .