VOGONS


First post, by matze79

User metadata
Rank l33t
Rank
l33t

Hi,

i recently aquired a DFI G486VPC / G430 VPC Board for 15€ which is rebranded as Sensormatic.

I`m running Cyrix 5x86 @ 2x50Mhz but running on 3x33Mhz it makes difference so its not some kind of divider as i was thinking before 😒

As you can see Memory Speed is pretty slow, shouldnt it at least around 30-35Mb/s.
Maybe this is due the Sensormatic BIOS ? Which is some kind of industrial equipment company
i set everything to high but it does not increase Performance.

Its this Mainboard:
https://stason.org/TULARC/pc/motherboards/D/D … PC-REV-BA0.html

Thanks for any Help, Tipps!

Last edited by matze79 on 2020-01-16, 14:51. Edited 1 time in total.

https://www.retrokits.de - blog, retro projects, hdd clicker, diy soundcards etc
https://www.retroianer.de - german retro computer board

Reply 1 of 2, by matze79

User metadata
Rank l33t
Rank
l33t

Here is Sensormatic BIOS:

https://www.retrokits.de - blog, retro projects, hdd clicker, diy soundcards etc
https://www.retroianer.de - german retro computer board

Reply 2 of 2, by derSammler

User metadata
Rank l33t
Rank
l33t

No idea, really, but I would try with less memory. Could be that it can't cache the 48 MB you have installed currently. Try with 32 or even 16 MB and see if that changes anything.