VOGONS


Reply 120 of 324, by iulianv

User metadata
Rank Member
Rank
Member

Well, last night's "debugging session" was pretty weird - with 128MB of RAM I couldn't even get near the ~12m time, all I got was 16-17m 🙁. After removing one of the two 64MB sticks I got 11m26s (with RAM settings maxed out - since it's PC100 CL2, it should do PC66 with any settings a mainboard could throw at it)...

Reply 121 of 324, by m1919

User metadata
Rank Member
Rank
Member

Dual Pentium 3 Xeon 550/1Mb SL3CE on ASUS XG-DLS

3m 51.875s

3.203 seconds slower than my run using the Intel MS440GX board.

Edit: Did another run and came in at 3m 34.328s.

Crimson Tide - EVGA 1000P2; ASUS Z10PE-D8 WS; 2x E5-2697 v3 14C 3.8 GHz on all cores (All core hack); 64GB Samsung DDR4-2133 ECC
EVGA 1080 Ti FTW3; EVGA 750 Ti SC; Sound Blaster Z

Reply 122 of 324, by m1919

User metadata
Rank Member
Rank
Member

Dual Pentium 3 Xeon 700/1Mb SL49P on ASUS XG-DLS

2m 53.687s

Crimson Tide - EVGA 1000P2; ASUS Z10PE-D8 WS; 2x E5-2697 v3 14C 3.8 GHz on all cores (All core hack); 64GB Samsung DDR4-2133 ECC
EVGA 1080 Ti FTW3; EVGA 750 Ti SC; Sound Blaster Z

Reply 123 of 324, by sgt76

User metadata
Rank Oldbie
Rank
Oldbie

Updated!!!

Sub 10s
Core i7 3820 @ 4.3ghz, DDR3 2133mhz - 8.752s
-
Sub 15s
Core i7-2600 @ 3.4ghz - 10.867s
core i7 950 @ 3.83GHz: 10.873s
Core i7 3610QM @ 3.3ghz: 11.482s
Core2Duo E8500 @ 3.8GHZ (400FSB) - 12.476s
C2D E8500 @3,8 GHz, DDR2-800 4-4-4-12 2T- 12.558s
Core i5 760 - 12.667s.
Core i7-2720QM 2.2Ghz - 12.854s

Sub 30s
e7400 @ 3.33g(333*10), p965,ddr2-667 4-4-4-12 15.6s
Q6600 @ 3.2ghz - 15.953s
X4 960T 4.4GHz - 16.286s
Intel Pentium Dual Core E5200 @ 3333MHz (266x12.5)- 16.7356 seconds
3.5GHz Phenom II X4 - 19.703s
Phenom II X6 1055T - 21.154s
Phenom II X6 1090T -21.434s
Core i3 M330 2.13GHz - 21.513s
Phenom II 3.2Ghz - 21.699s
X4 960T 3.0GHz - 23.353s
Celeron E3400 2.60Ghz: 24.321s
e2160 @ 2.4g(266*9), p965, ddr2-533 3-3-3-9: 25s
Athlon II X3 450 - 25.672s

Sub 60s
Athlon64 3500+(venice)@2.5g(250*10), nforce3, ddr500: 34.5s
Athlon X2 4850e (2.5GHz Brisbane, 2x512k L2) - 36.219s
Pentium 4 (Cedar Mill) 3.75Gz - 36.738s
Athlon 64 3000+ (Venice E6) @ 2.5ghz - 37.172s
Prescott 3.0E @ 3.6Ghz - 38.750s
AMD Athlon 64 X2 4400+ (2.3GHz Brisbane 65nm 2x512k L2) = 39.204s
P4 651 D0 (Cedar Mill 3.4GHz) - 39.750s
P4 3.2C @ 3.6GHz (northwood) - 41.125s
Phenom II X3 E840 (1.9GHz, Caspian core, 3x512mb L2 Cache) = 41.169s
Athlon 64 3200+ 2.2Ghz - 42.594s
Pentium D 930 - 42.844s
Athlon 64 3500+ 2.2Ghz - 43.906s
P4 530J, DDR2-533 4-4-4-12: 44.797s
Athlon 64 3200+ 2.2Ghz - 45.015s
Prescott 3.0E @ 3ghz - 45.094s
AMD Athlon 64 3700+ (2.2GHz 1MB L2, San Diego) = 45.312s
P4 Northwood HT 3.2Ghz - 46.734s
AMD Sempron LE-1100 - 47.750s
P4 Northwood HT 3.2GHz - 48.984s
Pentium D 940 @ 3.2ghz - 50.937s
Northwood 2.8B @ 3.15ghz - 55.57s
Pentium 4 HT Northwood 2.6GHz - 56.578s
Athlon XP 3200+ (2.2Ghz) - 57.406s
Athlon XP 2600+ (2083MHz T-bred 166MHz FSB)- 58.359s

Sub 3mins
Sempron 2600+ (1.83Ghz 333fsb) - 1m 05.438s
XP 2000+ (1.67Ghz Palomino 133fsb) - 1m 23.850s
p3-s 1.4g, 815e mainboard, sdram 2-2-2-5 1:36.5s
Pentium III 1.4S @ 1.6ghz: 1m 38.079s
PIII Tualatin 1400S/512/133 @ 1470MHz / 140FSB: 1m 42.387s
Pentium 3 1400S - 1m 50.764s
Athlon Thunderbird 1400C - 2m 0.766s
Pentium III 1400Mhz - 2m 6.150s
PIII Coppermine @ 1127MHz, PC133 @ 150FSB - 2m 11.278s
1.0GHz Pentium III Coppermine - 2m 21.344s
Slot 1 P3 1GHz FSB100 - 2m 28.654s
1.1Ghz Celeron Coppermine - 2m 42.641s
2 x P3 800 - 02m 42.750s
Slot A Athlon 1GHz Orion - 2m 52.087s
Dual Pentium 3 Xeon 700/1Mb SL49P, ASUS XG-DLS: 2m 53.687s
PIII Coppermine @ 966mhz - 2m 57.883s
Slot A Athlon 950MHz Orion - 2m 58.426s
Coppermine 1000 - 2m 58.616s

Sub 5mins
Mobile Pentium 3 650 (Win2000 SP4) - 3m 02.853s
Pentium III 933Mhz - 3m 9.189s
P3 800 Slot 1 - 03m 13.706s
Pentium 3 650MHz - 3m 7.930s
Intel Celeron 800MHz - 3m 29.461s
Slot A Athlon 600MHz Pluto - 3m 32.616s
Dual Pentium 3 Xeon 550/1Mb SL3CE, ASUS XG-DLS - 3m 34.328s
AMD Athlon 700MHz - 3m 38.915s
Dual Pentium 3 Xeon 550/1Mb SL3CE, Intel MS440GX - 3m 48.672s
Slot 1 P3 550MHz Katmai - 3m 54.808s
Mobile Celeron 500MHz (Win2000 SP4) - 4m 6.975s
Pentium III Coppermine 600Mhz - 4m 7.143s
Intel Celeron 800 - 4m 07.752s
AMD Athlon 550MHz - 4m 13.074s
Intel Celeron 466MHz - 5m 03.346s
k6-2+ @ 550 (100*5.5), l3 cache on- 5:19
k6-2+ 630(105*6) 5:26
k6-2+ 578(105*5.5) 5:29
Pentium II 350MHz @ 5m 29.354s
Pentium III Katmai 450mhz- 5m 44s
k6-2+ 550 5:44

Sub 10mins
k6-3 450: 6:00
kMobile Celeron 500MHz (Coppermine, Skt 495) = 6m 00.120s
6-3 450: 6:07 onboard cache on
k6-3 450: 6:13 onboard cache off
k6/3 450 - 6m 18.131s
Pentium II-400 PC-100 CAS2: 6m 20.434s
k6-2+ @ 550 (100*5.5) l3 cache off- 6:36
Celeron 366MHz - 6m 38.563s
k6-2+ 450: 6:50
Celeron 333MHz - 6m 57.971s
Pentium 2 266MHz - 7m 26.852s
AMD K6-2 @495mhz - 8m 7.024s
Celeron 266MHz - 9m 14.117
Pentium Pro 200MHz 256K Cache - 9m 41.396s

Sub 20mins
Cyrix MII 300Mhz - 11m 23.560s
Pentium 233MMX @262Mhz (75x3.5): 12m 5.075s
Mobile Pentium MMX 233MHz (Tillamook on MMC-1) - 12m 24.011s
Pentium Pro 200Mhz - 12m 29.815s
AMD K6-233 - 12m 42.204s
Pentium 133mhz - 16m 23.153s
K6-2 475Mhz - 16m 33.135s
k6-2+ @ 133mhz(66*2): 17m 30s

Sub 30mins
IDT Winchip C6 200: 23m 32.450s
Mobile Pentium 120MHz, NT 3.51 SP5- 25m 57.289s
Mobile Pentium 120MHz, Windows 3.11 - 27m 30s

Sub 60mins
Mobile Pentium 120MHz, Windows 98- 30m 23.536s
Pentium 66 - 30min 36sec 231ms
Intel Pentium 75MHz - 45m 27.274s
AMD Enhanced Am486DX4 120MHz - 50m 31.356s

Sub 30 days 🤣
386SX-16 - 27days 19h 31min 43sec

Last edited by sgt76 on 2012-10-03, 13:39. Edited 1 time in total.

Reply 125 of 324, by CapnCrunch53

User metadata
Rank Member
Rank
Member

Just tested this on my Voodoo5 build.

6Pf0js.jpg
Valkyrie - 59.946s - 2.0GHz Athlon XP 2400+ Thoroughbred, Asus A7N333, 2x512MB PC2700 DDR, Windows XP Home SP3

I'm impressed with this thing; only about 3 seconds slower than my Northwood, and that thing's pretty snappy in XP for what I use it for.

PCs, Macs, old and new... too much stuff.

Reply 126 of 324, by Mau1wurf1977

User metadata
Rank l33t++
Rank
l33t++

Stock i7 3770. Asrock H61 board and 2x4GB DDR3 1333:

http://imageshack.us/photo/my-images/28/superpio.jpg/

My website with reviews, demos, drivers, tutorials and more...
My YouTube channel

Reply 127 of 324, by m1919

User metadata
Rank Member
Rank
Member

Dual Pentium 3 Xeon 700/1Mb SL49P @ 784Mhz (7.0 x 112Mhz FSB) on ASUS XG-DLS

2m 39.344s

Last edited by m1919 on 2012-10-25, 06:37. Edited 1 time in total.

Crimson Tide - EVGA 1000P2; ASUS Z10PE-D8 WS; 2x E5-2697 v3 14C 3.8 GHz on all cores (All core hack); 64GB Samsung DDR4-2133 ECC
EVGA 1080 Ti FTW3; EVGA 750 Ti SC; Sound Blaster Z

Reply 129 of 324, by m1919

User metadata
Rank Member
Rank
Member

Dual Pentium 3 Xeon 1Ghz/256Kb SL4HE on ASUS XG-DLS

@ 750Mhz (7.5 x 100Mhz FSB)

3m 14.140s

@ 840Mhz (7.5 x 112Mhz FSB)

2m 46.187s

Lol, these are officially supposed to run on the i840 based boards. Anyway, the higher clock rate is nulled by the 256Kb L2 cache, a paltry amount compared to even the 1Mb cache of the 700Mhz Xeons I normally run.

I was surprised that the board actually booted up with these, I wasn't expecting that at all. I don't think the microcode for these processors is present in the latest bios update for the XG-DLS, but I guess since these are "Cascades" cores and have on-die cache, they're fundamentally similar to true Xeons, even if there's only 256Kb L2 available.

I should try to get a pair of 933/256Kb Xeons. With the 7x multiplier, it'll be a more fair comparison running at 100 and 112 on the FSB since the clock speeds will be about the same.

Crimson Tide - EVGA 1000P2; ASUS Z10PE-D8 WS; 2x E5-2697 v3 14C 3.8 GHz on all cores (All core hack); 64GB Samsung DDR4-2133 ECC
EVGA 1080 Ti FTW3; EVGA 750 Ti SC; Sound Blaster Z

Reply 130 of 324, by TELVM

User metadata
Rank Oldbie
Rank
Oldbie

K6-2/500 @ 550MHz
PCChips M577 (1 MB onboard L2 ; 256MB cacheable RAM)
512MB PC-133
Win XP Pro SP3 32-bit

9m 43.870s

Phenom II 960T @ X6 @ 4.1GHz
ASUS M4A89GTD Pro
16GB DDR3 1600
Win 7 SP1 32-bit

16.973s

Let the air flow!

Reply 131 of 324, by SPBHM

User metadata
Rank Oldbie
Rank
Oldbie

2irb1x5.png

Pentium II 400
Asus P2B
96MB PC100 cas 3
Win98SE

I used to overclock this CPU to 498MHz without a problem, but I lost all my PC133 ram, and I just can't achieve the same OC with the current ram 🙁

Reply 132 of 324, by rick6

User metadata
Rank Member
Rank
Member

Hi all. I must say that this thread was one of the main reasons why i did register on this forum 😀

You made me try SupePi on my Intel 486DX2 66mhz, and 1M took 3 hours and 20 minutes. Is this ok for this cpu or would you figure that something is wrong? I ask this mainly because here http://hwbot.org/submission/2224197_michu_sup … min_46sec_952ms these guys seem to be able to do it in more or less than 1 hour and 20 minutes. Makes me wonder why!

I'm using Windows 3.11 and the motherboard http://www.rainbow-software.org/images/hardwa … cheetah_v17.jpg doesn't have onboard IDE controller and instdead i'm using a multi i/o ISA card much like this http://kotisivu.dnainternet.net/ttilli/Compon … A16_%283%29.JPG .

Would any of these justify the slow SuperPI 1M?

My 2001 gaming beast in all it's "Pentium 4 Williamate" Glory!

Reply 133 of 324, by Hatta

User metadata
Rank Member
Rank
Member

It looks like the results you linked to are from a CPU that's been overlocked to 104MHz. Not sure how they did that while keeping the memory speed at 33mhz though. Are there 486 boards that allow you to set a higher multiplier?

Reply 134 of 324, by rick6

User metadata
Rank Member
Rank
Member

I'm sorry, my bad, this is the correct link of the rankings http://hwbot.org/benchmark/superpi/rankings?h … t=0#interval=20 . Many of them seem to be using stock clock speeds on these processors. Even so i'm not really sure if my SuperPi times are correct for the cpu and rest of the specs, or if something could be improved\corrected. I'm using 16MB EDO ram by the way.

Reply 135 of 324, by SPBHM

User metadata
Rank Oldbie
Rank
Oldbie
rick6 wrote:

I'm sorry, my bad, this is the correct link of the rankings http://hwbot.org/benchmark/superpi/rankings?h … t=0#interval=20 . Many of them seem to be using stock clock speeds on these processors. Even so i'm not really sure if my SuperPi times are correct for the cpu and rest of the specs, or if something could be improved\corrected. I'm using 16MB EDO ram by the way.

maybe it's because you are using Windows 3.1, and not NT like them....
also could it be something like onboard cache?

Reply 137 of 324, by elianda

User metadata
Rank l33t
Rank
l33t

i7 3930K 4.3 GHz DDR3 1600 - 8.799s

Retronn.de - Vintage Hardware Gallery, Drivers, Guides, Videos. Now with file search
Youtube Channel
FTP Server - Driver Archive and more
DVI2PCIe alignment and 2D image quality measurement tool

Reply 139 of 324, by noshutdown

User metadata
Rank Oldbie
Rank
Oldbie

core2duo E8400 @ 3.6g(400*9), p45 board, ddr2-800 cl4-4-4-12 - 12.9s
pentium E5200 @ 3.33g(266*12.5), pt880 board, ddr2-533 cl3-3-3-9 - 17.3s
cyrix 6x86 @ 133(66*2), mvp3 board with 2mb cache, cl2-2-2-5 - 20:55
cyrix 6x86 @ 66(66*1), mvp3 board with cache disabled, cl3-3-3-6 - 41:10

and i request following records be updated with detail:

k6-2+ @ 550(100*5.5), mvp3 board with 2mb cache, cl2-2-2-5 - 5:19
k6-2+ @ 630(105*6), ali5 board with cache disabled, cl2-2-2-5 - 5:26
k6-2+ @ 578(105*5.5), ali5 board with cache disabled, cl2-2-2-5 - 5:29
k6-2+ @ 550, ali5 board with 512kb cache, cl2-2-2-5 - 5:41
k6-2+ @ 550, ali5 board with cache disabled, cl2-2-2-5 - 5:44
k6-3 @ 450, ali5 board with cache disabled, cl2-2-2-5 - 6:00

k6-3 @ 450, ali5 board with 512kb cache, sdram timing not optimized - 6:07
k6-3 @ 450, ali5 board with cache disabled, sdram timing not optimized - 6:13

k6-2+ @ 550 (100*5.5), mvp3 board with cache disabled, cl2-2-2-5 - 6:36
k6-2+ @ 450, ali5 board with cache disabled, cl2-2-2-5 - 6:50
k6-2+ @ 133(66*2), ali5 board with 512kb cache, cl2-2-2-5 - 17:30