Power Supply Fan Replacement \ VOGONS

Power Supply Fan Replacement

Topic actions

Post a reply

First post, by GabrielKnight123

Posted on 2018-08-28, 13:39

GabrielKnight123 Offline

Rank Oldbie

Rank: Oldbie
Posts: 608
Joined: 2017-03-03, 15:39

I have a fan that is dead and on the sticker it has:

DC 12V 0.16A im looking at a Noctua fan redux here:

https://www.scorptec.com.au/product/Cooling/4 … F-R8-REDUX-1800

and under the Noctua's specs page it says "Max input current = 0.11A" will this Noctua be ok to use in an AT power supply as the original fan was getting 0.16 amps and the max for the Noctua is 0.11 amps?

Reply 1 of 2, by Slot1

Posted on 2018-08-28, 17:38

Slot1 Offline

Rank Newbie

Rank: Newbie
Posts: 46
Joined: 2018-03-20, 09:32

It should be fine, it uses less power than the original fan therefore the psu can provide it.

Reply 2 of 2, by konc

Posted on 2018-08-28, 19:27

konc Offline

Rank l33t

Rank: l33t
Posts: 2273
Joined: 2013-01-14, 15:09
Location: Greece

Completely the other way around of what you think about it. This number is what the fan will actually ask for, not what it can withstand.

Go to top of page Go to top of page

Back to General Old Hardware

Main menu

Common searches