VOGONS

Search

Common searches

P5I430TX/T1B+ Keyboard Port Issues

Topic actions

First post, by hyprthecat

Posted on 
User metadata
Rank Newbie
Rank
Newbie

Hey there, I have a computer which I suspect might have a bad fuse on it.

It seems like a very decent unit, but I am unsure if I should get a USB hub installed in it to see if i can get it past the POST screen or what I should do.

there was a previous topic in here at p5i430tx titanium ib+ - No Keyboard Present which I might have a similar issue, but I am wondering if i go the fuse replacement route which type of wheat seed fuse I should use.

EDIT : I just tried the USB hub, it doesn't recognize a keyboard. And the LEDs on the PS/2 keyboard light up for a second but don't respond, there isn't a keyboard error either just a CMOS Checksum Error which isn't related.

Reply 3 of 5, by computerguy08

Posted on 
User metadata
Rank Member
Rank
Member
hyprthecat wrote on 2020-04-25, 03:01:

I have a computer which I suspect might have a bad fuse on it.

Do you have a multimeter ? It takes one minute to check if the fuse is bad (using continuity or resistance mode). The fuse should be the green thing below the KB connector, like in the thread you mentioned.

Reply 5 of 5, by hyprthecat

Posted on 
User metadata
Rank Newbie
Rank
Newbie

I couldn't find a fuse, unless I am missing something.

I attached a photo of the keyboard port area on the board.

EDIT : I did read in the other post the fuse is labeled as F1 I might have found it.

Attachments

Go to top of page Go to top of page
Back to General Old Hardware
Close window
Close window