VOGONS


First post, by rcarkk

User metadata
Rank Member
Rank
Member

Hi guys. Been testing this socket 8 MB. I´m having some incompatibility issues, but they are being sorted, however, yesterday i tried two ISA soundcards which seem to be PnP. An ESS 1868F and an Yamaha YMF719E-S.
None of these cards are being recognized, no matter the ISA slot i use. All of the slots were tested. Any ideas? The PSU has -5v line. IDE channels and PCI channels are working fine.

Baby AT socket7 - Pentium MMX 233MHz + 3Dfx Voodoo
Socket 8 build - Soyo 6FA + Pentium Pro 200MHz + 3Dfx Voodoo 2 12MB
PC Remake - Pentium III 450 + Matrox G400 16MB
The K6-III build

Reply 2 of 12, by rcarkk

User metadata
Rank Member
Rank
Member

Windows 98 SE doesnt recognize any of these cards. They don´t show up in hardware manager. And on boot up, the cards dont show up on device list before windows startup

Baby AT socket7 - Pentium MMX 233MHz + 3Dfx Voodoo
Socket 8 build - Soyo 6FA + Pentium Pro 200MHz + 3Dfx Voodoo 2 12MB
PC Remake - Pentium III 450 + Matrox G400 16MB
The K6-III build

Reply 4 of 12, by rcarkk

User metadata
Rank Member
Rank
Member

IRQ-3 and 4 is assigned to Legacy ISA. IRQ from 5 to 15 is assigned to PCI/ISA PnP (IRQ-6, 8 and 13, don´t appear on the list).
DMA-0 to DMA-7 is assigned to PCI/ISA PnP

PCI IRQ Activated by : Level
PCI IDE IRQ Map to: PCI-AUTO

These are the settings in BIOS

Baby AT socket7 - Pentium MMX 233MHz + 3Dfx Voodoo
Socket 8 build - Soyo 6FA + Pentium Pro 200MHz + 3Dfx Voodoo 2 12MB
PC Remake - Pentium III 450 + Matrox G400 16MB
The K6-III build

Reply 6 of 12, by rcarkk

User metadata
Rank Member
Rank
Member

- Resources Controlled By: Manual
- Reset Configuration Data: Disabled

This are default settings from BIOS

Baby AT socket7 - Pentium MMX 233MHz + 3Dfx Voodoo
Socket 8 build - Soyo 6FA + Pentium Pro 200MHz + 3Dfx Voodoo 2 12MB
PC Remake - Pentium III 450 + Matrox G400 16MB
The K6-III build

Reply 7 of 12, by rcarkk

User metadata
Rank Member
Rank
Member

By the way. Aren´t the ISA slots controlled by the Southbridge of the 440FX chipset?
What about PCI slots? Are controlled by Northbridge or Southbridge? PCI works perfect

Baby AT socket7 - Pentium MMX 233MHz + 3Dfx Voodoo
Socket 8 build - Soyo 6FA + Pentium Pro 200MHz + 3Dfx Voodoo 2 12MB
PC Remake - Pentium III 450 + Matrox G400 16MB
The K6-III build

Reply 10 of 12, by rcarkk

User metadata
Rank Member
Rank
Member
Rawit wrote on 2021-03-05, 16:09:

Can you switch to AUTO and Enabled? See if the cards get listed somewhere with those settings.

Of course. I will try that. Will test an AWE64 today with those settings. Will try even a diferent PSU because of -5v

Baby AT socket7 - Pentium MMX 233MHz + 3Dfx Voodoo
Socket 8 build - Soyo 6FA + Pentium Pro 200MHz + 3Dfx Voodoo 2 12MB
PC Remake - Pentium III 450 + Matrox G400 16MB
The K6-III build

Reply 11 of 12, by rcarkk

User metadata
Rank Member
Rank
Member
Oetker wrote on 2021-03-05, 16:15:

You could try restarting into DOS and initializing them with Unisound, just as a check.

Didn´t know that software to be honest. I guess i could try that

Baby AT socket7 - Pentium MMX 233MHz + 3Dfx Voodoo
Socket 8 build - Soyo 6FA + Pentium Pro 200MHz + 3Dfx Voodoo 2 12MB
PC Remake - Pentium III 450 + Matrox G400 16MB
The K6-III build

Reply 12 of 12, by rcarkk

User metadata
Rank Member
Rank
Member

Unisound doesn´t detect any ISA PnP sound card. Any suggestions? Updated BIOS, same issue. ISA slots have been a nightmare

Baby AT socket7 - Pentium MMX 233MHz + 3Dfx Voodoo
Socket 8 build - Soyo 6FA + Pentium Pro 200MHz + 3Dfx Voodoo 2 12MB
PC Remake - Pentium III 450 + Matrox G400 16MB
The K6-III build