First post, by zwrr
- Rank
- Newbie
I got a SYL8884PCI-EIO motherboard,
There is a 6-pin interface labeled CN8 next to its keyboard interface, because the manual information cannot be found.
I found GND, 5V by measurement.
There are also two directly connected to pins 199 and 200 of the UM8886 chip.
According to what is described here: Success: Adding a PS/2 mouse port to the Shuttle HOT433 (using a dedicated keyboard controller chip)
It is mouse data and mouse clock.
I have a question, if I connect the ps2 female directly and connect the mouse, will it cause damage to the UM8886?
Cyrix 486DLC-40, 386-VC-H, 16MB, GD5422, ES1868F
Intel 486DX4-100EW, VI15G, 16MB, WD90C33, ES1868F
AMD5x86-133, HIPPO-15, 32MB, S3 Vison 964, ES1868F
K6-3+ 500, T2P4, 128MB, Millennium II, Voodoo 2 12MB, SoundBlaster AWE32