First post, by zwrr
- Rank
- Newbie
I got a SYL8884PCI-EIO motherboard,
There is a 6-pin interface labeled CN8 next to its keyboard interface, because the manual information cannot be found.
I found GND, 5V by measurement.
There are also two directly connected to pins 199 and 200 of the UM8886 chip.
According to what is described here: Success: Adding a PS/2 mouse port to the Shuttle HOT433 (using a dedicated keyboard controller chip)
It is mouse data and mouse clock.
I have a question, if I connect the ps2 female directly and connect the mouse, will it cause damage to the UM8886?
486DLC-40, 386-VC-H, 32MB, GD5429, ES1868F
486DX4-100EW, VI15G, 32MB, ARK1000VL, ES1868F
5x86-120GP, HIPPO-15, 32MB, Riva128, ES1868F
Pentium MMX-233, T2P4, 128MB, TNT2, SB16
Tualatin-1.4G, 694X, 512MB, G400, Voodoo2, SB AWE32