Virtua Fighter 2 \ VOGONS

Virtua Fighter 2

Topic actions

First post, by JJXB

Posted on 2017-02-27, 01:48

JJXB Offline

Rank Newbie

Rank: Newbie
Posts: 58
Joined: 2015-11-23, 17:53

not sure what started causing it but it errors out or goes to start then just exits. tested on 2.53, WIP29-31 thus far and all exhibit the same behaviour. Tried on my unpatched exe's for it and my nocd and no color check patched exe's. the only time VF2 will load is if i rename the DDraw.dll or go into passthrough mode in dgVoodoo (again, with patched and unpatched exe's for the bypasses).

Reply 1 of 2, by Dege

Posted on 2017-02-28, 18:49

Dege Offline

Rank l33t

Rank: l33t
Posts: 3054
Joined: 2003-09-04, 11:06

It seems to work fine for me (WIP31):

The only issue was some flickering on the background, but I'm not sure if it's because of forced resolution.

Reply 2 of 2, by JJXB

Posted on 2017-04-07, 22:32

JJXB Offline

Rank Newbie

Rank: Newbie
Posts: 58
Joined: 2015-11-23, 17:53

ok, after a not welcome forced "refresh" of windows 10 from a login glitch, this started working on me. so i guess that something was broken as all hell in my install before.

Go to top of page Go to top of page

Back to dgVoodoo General