First post, by dfaber1
Hello,
I have a MT32 (old model) in my 486 DX2/66 system and I am having a weird issue in Wing Commander 2 using hard MPU card. For some reason, some notes like the explosion of the Tiger's Claw in the intro are wrong. Here is my system Specs:
Intel DX2/66
16MB RAM
AOpen AP43
Matrox Mystic 4MB
Sound Blaster AWE32 CT2760
Roland MT32 (old version)
Hard MPU 1.1 from Abotj
I have setup the MPU401 from the AWE32 to 300 and Hard MPU at 330. When I use SoftMPU with the AWE32 on 330 it seems to work properly. I tried with a AWE64 and I have the same issue.
Here is my sound configuration in Autoexec:
SET SOUND=C:\SBAWE32
SET BLASTER=A220 I5 D1 H5 P300 E620 T6
LH C:\UNISOUND\UNISOUND.COM /CS /VC80 /VL80 /VF80 /VM00 /VP00
Here is config.sys:
DEVICE=C:\DOS\EMM386.EXE RAM 8192
I am using the 0.81b version of Unisound.
Here is what I have tried :
1. Changing Slots
2. Changing sound card for AWE64
3. Changing IRQ
4. Changing version of Unisound
Any help would be appreciated.