First post, by sf78
I wanted to make this thread as this model seems to be less talked about and there are a few issues setting it up in DOS. First of all, you NEED Windows to install it, the DOS installation does not copy any files (config or otherwise) to your HDD therefore it's unlikely you get the desired configuration just by using the presets. The Windows installation does allow you to configure the card during installation, but it also copies CONFIG.EXE to your UTILITY folder so you can tweak it later. The problem with this card is that it uses MIDI 330 as a preset which conflicts with other MIDI devices and you need to change it to 300 to make things work. The preset for IRQ was 5 so that didn't cause any problems for me. Here are the drivers needed for this card (SGP16II). Make sure you check the proper card version from the index file so you get the correct driver. Mine used the MMSN822 chip so P16II-1.zip and P16II-2.zip where the correct ones. Also, the HWSET utility used with other Aztech cards DOES NOT work with this one, you need the config utility mentioned before.
edit: I uploaded the UTILITY folder which should have everything you need to configure and diagnose the card under DOS. No need to install Windows then. 😀