Reply 36 of 51, by bestemor
- Rank
- Oldbie
Can you tell me what your FPO# is on your processor?
Well, I DID say it was made in week 17 in my earlier post, didn't I ?.... 😎
So, 9817etc it is.
Can you try running the processor at 66 FSB with a 6.0 multiplier?
As the bios is quite old, there IS NO 6,0x(or higher) multiplier....
And trying to run 5,5x, weell...... it reverts to a unruly 2x mode, at least POST shows 5,5x like only 133mhz, and L2 cache is gone <sob>
So I have a feeling that your plan won't work quite like you hope, only changing the multi.
(3x-5x and between works fine though)
---
PS: tested with a second mobo, same model but newer bios:
Now I get 5,5x 66mhz to work, gives 366mhz AND 512kb.
6x 6,5x 7x etc all refuses to start (black screen), and after a hard reboot, it actually POSTs, but shows speed as 200mhz...
But when entering bios, my old setting is still there(6x66), weird.
Anyway, if you want the full 400mhz, seems like you'd have to go with 4x100.
And overclocking is not that great either, tried 112x4, but no-go.
.