First post, by theelf
- Rank
- Oldbie
Hi, first sorry my english
I buy a 210CS for cheap, and is "working" good, exept not boot, i just get a cursor blinking after bios boot
The bios and memory post is OK, i can enter bios, options are saved, and memory count is ok, but after this just cursor blinking
I tried different hard disk, CF>IDE, floppy, nothing boot. Not from HDD or floppy
I removed internal battery (are two), disable cache in bios, nothing
If at least boot from floppy i can test something, but just the cursor. I tested same floppy and HDD, CF, on a older toshiba i have (486) and both boot OK
Any ideas?
thanks