VOGONS


MIDI Thru box

Topic actions

First post, by dreamblaster

User metadata
Rank Oldbie
Rank
Oldbie

Hi guys,
i needed a MIDI Thru box for my 'MIDI module tower', and made one for myself
See photos.

If it makes sense, i will consider making a larger batch.

EDIT 01.01.2022 : available here : https://www.serdashop.com/MIDI-THRU-BOX

Attachments

  • DSCN1440.JPG
    Filename
    DSCN1440.JPG
    File size
    659.59 KiB
    Views
    1529 views
    File license
    Fair use/fair dealing exception
  • DSCN1441.JPG
    Filename
    DSCN1441.JPG
    File size
    819.06 KiB
    Views
    1529 views
    File license
    Fair use/fair dealing exception
  • DSCN1443.JPG
    Filename
    DSCN1443.JPG
    File size
    1001.45 KiB
    Views
    1529 views
    File license
    Fair use/fair dealing exception
Last edited by dreamblaster on 2022-01-01, 22:23. Edited 1 time in total.

Visit http://www.serdashop.com for retro sound cards, video converters, ...
DreamBlaster X2, S2, S2P, HDD Clicker, ... many projects !
New X2GS SE & X16GS sound card : https://www.serdashop.com/X2GS-SE ,
Thanks for your support !

Reply 2 of 13, by matze79

User metadata
Rank l33t
Rank
l33t

Nice MIDI Splitter 😀

https://www.retrokits.de - blog, retro projects, hdd clicker, diy soundcards etc
https://www.retroianer.de - german retro computer board

Reply 6 of 13, by dreamblaster

User metadata
Rank Oldbie
Rank
Oldbie

Oh well, ok i will build a few more then 😉

Visit http://www.serdashop.com for retro sound cards, video converters, ...
DreamBlaster X2, S2, S2P, HDD Clicker, ... many projects !
New X2GS SE & X16GS sound card : https://www.serdashop.com/X2GS-SE ,
Thanks for your support !

Reply 7 of 13, by CrossBow777

User metadata
Rank Member
Rank
Member

I would buy one, but I want one that allows me to select with output is actually receiving the data. I also prefer to not have any cabling on the front of the unit. In my case I have 3 separate modules I like to switch between when playing games. But currently I'm using the midi thru on two of them to do this. So it requires all three modules to be powered on if I want to listen to just #3 at the end of the chain. It would be nice if some essentially made a cheap replacement of the old Roland MPU-105 midi selector.

g883j7-2.png
Midi Modules: MT-32 (OLD), MT-200, MT-300, MT-90S, MT-90U, SD-20

Reply 8 of 13, by keropi

User metadata
Rank l33t++
Rank
l33t++

Well a midi switch won't help you much with what you describe... if games send some data to modules or setup in a certain way and you switch modules then the new module will miss that data and you will get wrong playback. What you need IMHO is a sound mixer where you can select which module to hear - they would all be powered on and received all needed data so no playback issues.

🎵 🎧 PCMIDI MPU , OrpheusII , Action Rewind , Megacard and 🎶GoldLib soundcard website

Reply 9 of 13, by RetroGamer4Ever

User metadata
Rank Oldbie
Rank
Oldbie

I'd love to see a DreamBlaster external USB audio box, with MIDI I/O and an internal Waveblaster header for the X2GS (or whatever) board. With PCI slots being gone from new boards, the only alternative for MIDI is external boxes and consolidation always makes things easier.

Reply 10 of 13, by CrossBow777

User metadata
Rank Member
Rank
Member
keropi wrote on 2021-11-22, 17:51:

Well a midi switch won't help you much with what you describe... if games send some data to modules or setup in a certain way and you switch modules then the new module will miss that data and you will get wrong playback. What you need IMHO is a sound mixer where you can select which module to hear - they would all be powered on and received all needed data so no playback issues.

What you have state does happen even now and I usually have to power off the module I want to use to correct for odd issues like this. With something like the old MPU-105, you can select which module is actually receiving the signal. I don't normally swap modules in the middle of playing a game. I do currently use a physical speaker selector box to control which of the modules is actually able to be heard. The volume of each of my modules is adjusted individually to essentially be at the same level so a mixer isn't needed in this case.

I do get what you are saying in that even with this device, all the signals go to everything plugged in, and so the devices I don't want to use I just leave powered off and that would work too. But again, I don't like cables coming out the front of the device and would prefer if all the cabling was just on the backside of the device.

g883j7-2.png
Midi Modules: MT-32 (OLD), MT-200, MT-300, MT-90S, MT-90U, SD-20

Reply 11 of 13, by keropi

User metadata
Rank l33t++
Rank
l33t++

Ah ok I get it, I kinda thought you did it at random times to hear differences on the fly... Sure what you say works fine

🎵 🎧 PCMIDI MPU , OrpheusII , Action Rewind , Megacard and 🎶GoldLib soundcard website

Reply 12 of 13, by dreamblaster

User metadata
Rank Oldbie
Rank
Oldbie

Started small batch of midi thru boxes (as first described).
Also thinking about various variants...

Visit http://www.serdashop.com for retro sound cards, video converters, ...
DreamBlaster X2, S2, S2P, HDD Clicker, ... many projects !
New X2GS SE & X16GS sound card : https://www.serdashop.com/X2GS-SE ,
Thanks for your support !

Reply 13 of 13, by dreamblaster

User metadata
Rank Oldbie
Rank
Oldbie

OK, available now as solder kit and fully assembled PCB : https://www.serdashop.com/MIDI-THRU-BOX

Attachments

  • MIDITHRU_Kit.jpg
    Filename
    MIDITHRU_Kit.jpg
    File size
    20.33 KiB
    Views
    1086 views
    File license
    Fair use/fair dealing exception
  • MIDITHRU_InEnclosure.jpg
    Filename
    MIDITHRU_InEnclosure.jpg
    File size
    40.38 KiB
    Views
    1086 views
    File license
    Fair use/fair dealing exception
  • MIDITHRU_FullPCB.jpg
    Filename
    MIDITHRU_FullPCB.jpg
    File size
    26.73 KiB
    Views
    1086 views
    File license
    Fair use/fair dealing exception
  • MIDITHRU_Enclosure2.jpg
    Filename
    MIDITHRU_Enclosure2.jpg
    File size
    18.04 KiB
    Views
    1086 views
    File license
    Fair use/fair dealing exception
  • MIDITHRU_Enclosure.jpg
    Filename
    MIDITHRU_Enclosure.jpg
    File size
    11.67 KiB
    Views
    1086 views
    File license
    Fair use/fair dealing exception

Visit http://www.serdashop.com for retro sound cards, video converters, ...
DreamBlaster X2, S2, S2P, HDD Clicker, ... many projects !
New X2GS SE & X16GS sound card : https://www.serdashop.com/X2GS-SE ,
Thanks for your support !