First post, by Sphere478
- Rank
- l33t++
So if a pentium mmx (350nn) runs at 2.8v
But a cyrix 433gp works at 2.2v (and is also 350nm)
Does that mean that the cyrix is under volted?
Or is 2.8 unsafe for the cyrix?
Edit: the later models of cyrix apparently is 180nm or 250mm catsay says the 433gp cores are 180nm which makes sense based on the lower voltage but being mis reported by cpu-z which may mean that the link posted later in this thread is also wrong? Idk.. conflicting reports but going from 250 to 180 explains 2.9v to 2.2v
So I will withdraw cyrix from the question. But still wonder if voltages closely follow process size.