First post, by dondiego
- Rank
- Member
I own an ASUS P2B 1.02 and SetFSB (last version) doesn't detect correctly the current FSB when i hit GetFSB. It says the current FSB is 50 but it is 100, the cpu speed is right (300). The PLL is detected correctly. CPUFSB works well but it doesn't save settings and i can't register. BTW is it true that you can damage the hardware if you select the wrong PLL?
The CPU is an unlocked 333 MHz PII set at 300 (100x3) via motherboard jumpers.