First post, by IBMFan
I have a Gigabyte GA-H61M-S2PV with BIOS ver. FE. All revisions of this board seem to support 1333 DDR3 only but when I install 1600 Mhz modules the BIOS reports it as 1600 Mhz, memtest86 handles it as 1600 Mhz, hwinfo64 reports it as 1600 Mhz. Even the W7 hardware test grades the 1600 module higher. I haven't found anything about Gigabyte adding support for 1600 modules later.
Ram settings in BIOS are normal @ 1.5V, timings are different.
1333 Mhz: 9-9-9-24 (Kingston 2 GB)
1600 Mhz: 11-11-11-28 (Hynix 4 GB, Kingston 8 GB)
What's going on?