First post, by AshleyK
- Rank
- Newbie
Hello everyone
I bought a Lucky Tech P6BX2 motherboard with a i440BX chipset to finally be able to play around with my Slot 1 CPUs.
But i have ran into an issue, it doesn't detect any 256 mb sdram dimms properly , instead reporting them as 128mb. The motherboard's manual also says that it does support up to 768 mb of ram in a 3x256mb config, but no luck for me. Have tested with 3 different dimms, that i have previously verified on a Compaq Skt370 board to be 256MB, all reporting 128MB on the PII board.
Is there anything i missed or i can do about it? Any help would be appreciated.
Thanks in advance.