ZIDA 4DPS rev 1.0 COM port cable pinout \ VOGONS

ZIDA 4DPS rev 1.0 COM port cable pinout

Topic actions

First post, by HansZ

Posted on 2023-05-11, 20:16

HansZ Offline

Rank Newbie

Rank: Newbie
Posts: 53
Joined: 2014-03-05, 21:57

Hello to all,

I have ZIDA 4DPS rev 1.0 (without the PS/2 connector) and trying to have working serial mouse. Ports are enabled, mouse driver is installed however mouse doesn't respond. I'm 100% positive its the issue with the com port cable. Does anyone knows correct pinout for this motherboard? Much appreciated, thanks

Reply 1 of 2, by bogdanpaulb

Posted on 2023-05-11, 20:38

bogdanpaulb Offline

Rank Member

Rank: Member
Posts: 317
Joined: 2022-11-15, 12:43
Location: Roumania

There are 2 versions of serial pinouts, open the serial brackets that you have used and check if they mach, if so, try with the other type.

Reply 2 of 2, by HansZ

Posted on 2023-05-13, 14:08

HansZ Offline

Rank Newbie

Rank: Newbie
Posts: 53
Joined: 2014-03-05, 21:57

just to confirm for anyone else having the same issue, correct pinout for rev 1.0 board and possible later revisions is:
13579
2468

Go to top of page Go to top of page

Back to General Old Hardware