First post, by Jackhead
- Rank
- Member
I have a SDHxC Slim Floppy emulator that can emulate 2 floppy drives.
I used a non twisted floppy cable and the dip switches 1 and 6 are set to on (for IDA0 and IDB1).
When i boot dos both drives are booting and showing up correctly. So far so good.
Booting into windows98SE both drives shown up but i cant access any of the drives. When i deactivate the second drive i have access on the first one.
My config file on the sd card has the two drives option set.
Also in windows device manager both drives shown up as working correctly.
Anyone have an idea whats going wrong here?
Dos 6.22: Asus VL/I-486SV2GX4 Rev 2.0 1Mb L2 - AMD A5x86 X5 ADZ 133MHz @160MHz - 64MB RAM - CT2230 - GUS ACE - MPU-401 AT - ET4000W32P
Win98SE: Asus P5K-WS - E8600 @ 4,5GHz - Strange God Voodoo 5 6000 PCI @ 66MHz PCI-X - 2GB DDR2 1066 - Audigy 2 ZS