First post, by JeffeSilva
- Rank
- Newbie
Hello. Well, I'd like to know if someone already had tried to flash EEPROM content from (512 x 8 / 256 x 16) to a memo organization(128 x 8 or 64 x 16). The reason is that, I have some, "93LC46" EEPROM and I want to flash for example a content of a "SB16 CT2950.BIN" which is on my case is an "AT93C66". In this case the "93C66" is probably fault, and the only possible replace and available for the moment I have is the "93LC46". I did already a test, and I could write data to it, however, when I checked the content I could see that it's different from the original file, that is, the information was written different. Could it be because of the organization in the file? I'd like to know if such operation is possible, as the "93LC46" has 1k of memory and the content of the firmware is 512 byte.