First post, by ia2115
Hey
im battling a bit, im trying to match this Case with a Chaintech 4SOM 2.1 motherboard, the motherboard only has a 2 pin switch header and 2 pin header for the button led.
the case has a 3 pin for turbo button, and the 2 pin for led is fine working.
i can put the 3pin over 2 pin header for turbo button and 1 pin extends to the led, and led says 33mhz
setup is Intel 486 dx2 66, a test with benchmark for cpu program says its in Write-Through mode, but when i read documentation who is almost useless, it should be in Write-Back..
i thought that might impact if the button could work or not, when i read how "intelligent" lcd displays work from other threads and minuszerodegrees.
but dont really know how to get further now, hope someone has ideas.. i really want both lcd to work like 33/66 display depending on the button pressed or not.
And if any has ideas on the 486 WT vs WB, i was thinking of trying to modify bios to see if any hidden features.. the official is pretty limited, no cpu options in bios.