First post, by IkeFox
Hello everyone,
I have been searching the internet for jumper settings of this board, but was not successful. Here's a top view image of the board: https://app.box.com/s/oyo83iovtuzm4fte41ft43n1pc08s2qh
The board doesn't have any identifiers except the sticker on the chipset, and the tag "Lite On 20v0" on the back. Unfortunately there are also no jumper settings on this board either, except for the CPU clock.
It boots with a 486DX2-66 installed, but cannot boot from the floppy drive. The drive only makes some seeking noise but then fails to boot. The drive and cable itself are fine, as tested on another machine.
The CMOS battery is dead, and a CMOS error is shown on each boot. I can disable the onboard FDD controller in the BIOS, but booting from an IO card with a FDD controller doesn't work either.
A search on the retro web showed some boards that look slightly similar (e.g. https://theretroweb.com/motherboards/s/octek-hippo-12), but the jumpers are completely different.
Here's the search result: https://theretroweb.com/motherboards/?page=1& … %5D%5Bsign%5D==
I've uploaded more pictures of the board and the BIOS settings here: https://app.box.com/s/ky38atz2woqp9wuwio5m9vajuaxchcgn