VOGONS


Reply 28320 of 28674, by dominusprog

User metadata
Rank Oldbie
Rank
Oldbie
DarthSun wrote on 2024-09-09, 21:21:
Today's work: Voodoo2 Single 3DM99 World Record. Thoroughly succeeded. I have been holding SLI for a long, Single failed but now […]
Show full quote

Today's work: Voodoo2 Single 3DM99 World Record. Thoroughly succeeded.
I have been holding SLI for a long, Single failed but now I stew there
Current record: 4016
My run:

AristoV2.jpg
Filename
AristoV2.jpg
File size
281.45 KiB
Views
1783 views
File license
Fair use/fair dealing exception
AristoV2_3DM99_2_WR.jpg
Filename
AristoV2_3DM99_2_WR.jpg
File size
382.19 KiB
Views
1783 views
File license
Fair use/fair dealing exception

Sweet card! Early to late 90s A-Trend products are the best!

Duke_2600.png
A-Trend ATC-1020 V1.1 ❇ Cyrix 6x86 150+ @ 120MHz ❇ 32MiB EDO RAM (8MiBx4) ❇ A-Trend S3 Trio64V2 2MiB
Aztech Pro16 II-3D PnP ❇ 8.4GiB Quantum Fireball ❇ Win95 OSR2 Plus!

Reply 28321 of 28674, by PcBytes

User metadata
Rank l33t
Rank
l33t

Finished recap of my MS-6163.

Attachments

"Enter at your own peril, past the bolted door..."
Main PC: i5 3470, GB B75M-D3H, 16GB RAM, 2x1TB
98SE : P3 650, Soyo SY-6BA+IV, 384MB RAM, 80GB

Reply 28323 of 28674, by PcBytes

User metadata
Rank l33t
Rank
l33t
smtkr wrote on 2024-09-14, 16:37:

Is that a custom BIOS? I've never seen one show monitors during POST like that.

Not at all. Fresh stock MSI BIOS from the TRW page, latest release because my 1000EB was showing up as " :00EB "

"Enter at your own peril, past the bolted door..."
Main PC: i5 3470, GB B75M-D3H, 16GB RAM, 2x1TB
98SE : P3 650, Soyo SY-6BA+IV, 384MB RAM, 80GB

Reply 28324 of 28674, by luckybob

User metadata
Rank l33t
Rank
l33t

I finally got around to putting my floppy disk drives into a proper case: --- sorry for the focus, i had a few beers during assembly and it looked okay at the time
20240910_192418.jpg?ex=66e71eae&is=66e5cd2e&hm=b054179e1a96bcb730536df1fee47fcd74ce467db7ac32a50a9b5dd5f2b10e79&

20240910_192707.jpg?ex=66e71eae&is=66e5cd2e&hm=8c52aa9b796cb9a122885a981fc69e56048f97b8cb9b2d3c3315e527c310c77f&

20240910_192719.jpg?ex=66e71eae&is=66e5cd2e&hm=a4cbef93ab80cf0a2569351e699b19d18c198d3e782493a8a1e443f85c269955&

Oh and this is the tape drive I removed from the AWESOME looking IBM inspired external chassis:

20240910_192814.jpg?ex=66e72d4e&is=66e5dbce&hm=3bf73b77710391fa531420a248ab1301ab1d8e2882b9246faa82598b9d02f30e&

20240910_192822.jpg?ex=66e72d4e&is=66e5dbce&hm=0c051d06fc8e84cb9b02eec43cc0e7d7b81629ce8dbbfe76e7123faccf9744b8&

I'll probably replace that tape drive image - I really had one too many that night. - but if you have a use for this particular tape drive, shoot me a PM.

It is a mistake to think you can solve any major problems just with potatoes.

Reply 28326 of 28674, by DarthSun

User metadata
Rank Member
Rank
Member
dominusprog wrote on 2024-09-14, 11:20:
DarthSun wrote on 2024-09-09, 21:21:
Today's work: Voodoo2 Single 3DM99 World Record. Thoroughly succeeded. I have been holding SLI for a long, Single failed but now […]
Show full quote

Today's work: Voodoo2 Single 3DM99 World Record. Thoroughly succeeded.
I have been holding SLI for a long, Single failed but now I stew there
Current record: 4016
My run:

AristoV2.jpg
Filename
AristoV2.jpg
File size
281.45 KiB
Views
1783 views
File license
Fair use/fair dealing exception
AristoV2_3DM99_2_WR.jpg
Filename
AristoV2_3DM99_2_WR.jpg
File size
382.19 KiB
Views
1783 views
File license
Fair use/fair dealing exception

Sweet card! Early to late 90s A-Trend products are the best!

You may be right, well run high peak tuning, with this card.

The 3 body problems cannot be solved, neither for future quantum computers, even for the remainder of the universe. The Proton 2D is circling a planet and stepping back to the quantum size in 11 dimensions.

Reply 28327 of 28674, by Mr_Magoo

User metadata
Rank Newbie
Rank
Newbie

Can absolutely agree to the HOTAS for flightsims! You won't find something better! Check out for the upgrades done by some guys. Incredible precisition by using magnetic position-sensors to the usually installed
potentiometers! Will check my links and if I find it, I can sent it to you - considered, you're interested...

Reply 28328 of 28674, by GigAHerZ

User metadata
Rank Oldbie
Rank
Oldbie

Have you ever thought using GameBoy cartridge cases as CPU containers? Check this out!

Attachments

"640K ought to be enough for anybody." - And i intend to get every last bit out of it even after loading every damn driver!

Reply 28329 of 28674, by BitWrangler

User metadata
Rank l33t++
Rank
l33t++

I think I noticed that a decade back, but other than buying games and tossing the game didn't find a good source for the cases.

Unicorn herding operations are proceeding, but all the totes of hens teeth and barrels of rocking horse poop give them plenty of hiding spots.

Reply 28330 of 28674, by GigAHerZ

User metadata
Rank Oldbie
Rank
Oldbie
BitWrangler wrote on 2024-09-15, 18:28:

I think I noticed that a decade back, but other than buying games and tossing the game didn't find a good source for the cases.

I got mine from aliexpress. The price was about 10€ for 25pc. (Right now the same offer is ~12,5€ for 25pc)

"640K ought to be enough for anybody." - And i intend to get every last bit out of it even after loading every damn driver!

Reply 28331 of 28674, by DudeFace

User metadata
Rank Member
Rank
Member
GigAHerZ wrote on 2024-09-15, 18:20:

Have you ever thought using GameBoy cartridge cases as CPU containers? Check this out!

i do this, also use game gear cases, but wrap them in tissue first.

Reply 28332 of 28674, by DudeFace

User metadata
Rank Member
Rank
Member
dormcat wrote on 2024-09-10, 20:46:

Not sure if this counts: browsing back issues of PC Magazine (Feb. 1982 to Jan. 2009) with Google Books. It's more than a digital library but a museum. 👏 As a foreigner it's particularly interesting to see a service or product popular in US / North America but completely unheard of locally.

i also like reading old computer magazines, i dont go as far back as the 80's only 1990-2010, tho recently i have been watching "The Computer Chronicles" on youtube from the 1980's, as far as i knew that was just the age of microcomputers powered by zilog Z80's, turns out they had some advanced stuff for the time, alot more advanced than my 80's computers which was an amstrad cpc and 6128k.

Reply 28333 of 28674, by dormcat

User metadata
Rank Oldbie
Rank
Oldbie
GigAHerZ wrote on 2024-09-15, 18:20:

Have you ever thought using GameBoy cartridge cases as CPU containers? Check this out!

Are those pieces of black paper/tape meant for preventing pins scratching cases?

Reply 28334 of 28674, by Repo Man11

User metadata
Rank l33t
Rank
l33t

I did some cleanup and zip ties on my P4P 800/6800 Ultra/3.2 Prescott @ 3.6 GHz/ Thermaltake V5 case. I recently finished Doom3 for the first time on my 939 system and I'm going for my second time on this system, which is period correct for a high end 2004 system (other than the SSD). With the resolution at 1024x768 and the settings on high it delivers 57 FPS on the Doom 3 timedemo, which is good enough for me. I would have been very happy to have this system in 2004, but I was too poor. Yesterday's high end machine is today's trash - the case, power supply, and motherboard were all free. I did have to replace all of the 6.3 volt 1500 microfarad caps on the P4P, I think I paid about $15.00 for 6800 (it was in a parts bundle purchased for $50.00). I bought the Akasa card cooler for the 6800 for $40.00 shipped, so that's the most expensive part.

Attachments

"We do these things not because they are easy, but because we thought they would be easy."

Reply 28335 of 28674, by Daniël Oosterhuis

User metadata
Rank Member
Rank
Member

This weekend, I reballed the PCI Creative Blaster 3DFX Voodoo Banshee a colleague gave me to try and fix.
The card had artifacting issues on cold boots, that would slowly fade as the chip got hot.

Once properly hot, Glide games worked just fine (starting them while the card was still artifacting would result in garbage output and crashing), but to me that indicated poor solder connections under the chip.
With how poorly these chips were cooled with piddly little heatsinks (the PCB had significant discoloration on the area of the PCB under the chip), I guess the PCB has been bent from the large temperature swings, causing cracked solder balls that expand and reconnect due to thermal expansion when the IC gets hot.

I did attempt a simple reflow before this, but that resulted in fully corrupted graphics in the BIOS, so that didn't do the trick.
I also tried a cheap Chinese replacement chip, but once soldered on, it didn't even get hot and had no output, so it's either a fake or already dead.

So, I pulled that chip back off, and practiced reballing it as the chips I've been reballing before were all ceramic BGA chips (PowerPC processors) rather than plastic BGA chips, which are susceptible to popcorning if not handled correctly.
After that went well, I finally went ahead and reballed the original IC, and soldered it back onto the card.

bansheereball1.jpg
Filename
bansheereball1.jpg
File size
546.39 KiB
Views
1482 views
File license
Fair use/fair dealing exception
bansheereball2.jpg
Filename
bansheereball2.jpg
File size
606.55 KiB
Views
1482 views
File license
Fair use/fair dealing exception
bansheereball3.jpg
Filename
bansheereball3.jpg
File size
549.02 KiB
Views
1482 views
File license
Fair use/fair dealing exception
bansheereball4.jpg
Filename
bansheereball4.jpg
File size
527.54 KiB
Views
1482 views
File license
Fair use/fair dealing exception

An initial test, after giving the PCI edge connector a good clean, results in a clean picure in the BIOS, free of artifacts.
I've still got to test Glide games, but this is a very good sign already.

bansheereball5.jpg
Filename
bansheereball5.jpg
File size
561.88 KiB
Views
1482 views
File license
Fair use/fair dealing exception

sUd4xjs.gif

Reply 28336 of 28674, by gerry

User metadata
Rank Oldbie
Rank
Oldbie
Repo Man11 wrote on 2024-09-16, 02:03:

I did some cleanup and zip ties on my P4P 800/6800 Ultra/3.2 Prescott @ 3.6 GHz/ Thermaltake V5 case. I recently finished Doom3 for the first time on my 939 system and I'm going for my second time on this system, which is period correct for a high end 2004 system (other than the SSD). With the resolution at 1024x768 and the settings on high it delivers 57 FPS on the Doom 3 timedemo, which is good enough for me. I would have been very happy to have this system in 2004, but I was too poor. Yesterday's high end machine is today's trash - the case, power supply, and motherboard were all free. I did have to replace all of the 6.3 volt 1500 microfarad caps on the P4P, I think I paid about $15.00 for 6800 (it was in a parts bundle purchased for $50.00). I bought the Akasa card cooler for the 6800 for $40.00 shipped, so that's the most expensive part.

that definitely has a 2004 dream machine spec and performance! great that its from parts free and cheap, thats part of the joy - creating something that seemed out of reach at the time

Reply 28337 of 28674, by PD2JK

User metadata
Rank Oldbie
Rank
Oldbie

This ECS UM8810P AIO 2.1 has cold boot problems, after pressing the reset button 20 times, I get a POST screen. The diagnostic card hangs at a few different POST codes, so that's not much for a help. So I decided to do a full recap, even though my Peak ESR70 meter says the caps are all good.

DSC_1638.JPG
Filename
DSC_1638.JPG
File size
1.26 MiB
Views
331 views
File license
Public domain

Now off to Deoxit every IC and socket this board has...

Edit: Yay it works flawlessly. No cold boot problems anymore, and the Am5x86 is running steady at 160MHz (4 x 40).
With 512kB 15ns L2 cache and a Trident 9440 it reaches these scores:
Speedsys: 57.98
Doom high detail: 45.88

Feel free to comment of course.

i386 16 ⇒ i486 DX4 100 ⇒ Pentium MMX 200 ⇒ Athlon Orion 700 | TB 1000 ⇒ AthlonXP 1700+ ⇒ Opteron 165 ⇒ Dual Opteron 856

Reply 28338 of 28674, by gerry

User metadata
Rank Oldbie
Rank
Oldbie
PD2JK wrote on 2024-09-16, 09:19:
This ECS UM8810P AIO 2.1 has cold boot problems, after pressing the reset button 20 times, I get a POST screen. The diagnostic c […]
Show full quote

This ECS UM8810P AIO 2.1 has cold boot problems, after pressing the reset button 20 times, I get a POST screen. The diagnostic card hangs at a few different POST codes, so that's not much for a help. So I decided to do a full recap, even though my Peak ESR70 meter says the caps are all good.

DSC_1638.JPG
Filename
DSC_1638.JPG
File size
1.26 MiB
Views
331 views
File license
Public domain

Now off to Deoxit every IC and socket this board has...

Edit: Yay it works flawlessly. No cold boot problems anymore, and the Am5x86 is running steady at 160MHz (4 x 40).
With 512kB 15ns L2 cache and a Trident 9440 it reaches these scores:
Speedsys: 57.98
Doom high detail: 45.88

Feel free to comment of course.

does this mean it might not have been the caps? its still a nice future proofing job either way.

Reply 28339 of 28674, by PD2JK

User metadata
Rank Oldbie
Rank
Oldbie
gerry wrote on 2024-09-16, 14:25:
PD2JK wrote on 2024-09-16, 09:19:

Feel free to comment of course.

does this mean it might not have been the caps? its still a nice future proofing job either way.

Yes that is possible. I've tested a few old ones and they were still good. But I was on the job anyway, so I figured to replace them anyway.

i386 16 ⇒ i486 DX4 100 ⇒ Pentium MMX 200 ⇒ Athlon Orion 700 | TB 1000 ⇒ AthlonXP 1700+ ⇒ Opteron 165 ⇒ Dual Opteron 856