Hello, stumbled onto this since I cannot get working 2x gravis gamepad and the gravis gamepad pro with the Logilink Gameport to Usb adapter.. On a YouTube video I found that switch has to be set on 3 for gravis gamepads, however only left and right directions work..

I have a Win 10 PC... Would this work?

If so I'm interested in purchasing.. As for soldering I am good at it 😀

The "Logilink Gameport to Usb adapter" is the same as the original "Rockfire Gameport Adapter".
It supports only analogue gameport joysticks whereas the "Necroware gameport adapter" implements own logic to also support Joysticks & gamepads in digital mode.
It is also OS independent, so you can even plug it into the USB connectior of your phone and play with a Gravis Gameport gamepad like this
https://m.youtube.com/watch?v=bDuXLQjaocE

1541 wrote on 2025-03-24, 20:38:

The "Logilink Gameport to Usb adapter" is the same as the original "Rockfire Gameport Adapter". It supports only analogue gamepo […]
Show full quote

The "Logilink Gameport to Usb adapter" is the same as the original "Rockfire Gameport Adapter".
It supports only analogue gameport joysticks whereas the "Necroware gameport adapter" implements own logic to also support Joysticks & gamepads in digital mode.
It is also OS independent, so you can even plug it into the USB connectior of your phone and play with a Gravis Gameport gamepad like this
https://m.youtube.com/watch?v=bDuXLQjaocE

Thanks for the detailed reply. Will check out the videos.

As for buying the kit, do I need to preorder from here?

I'm from Malta EU.

DesktopDynamite wrote on 2025-03-25, 10:51:

As for buying the kit, do I need to preorder from here?

No, but you can just contact the thread owner 😉

1541 wrote on 2025-03-28, 06:36:

DesktopDynamite wrote on 2025-03-25, 10:51:

As for buying the kit, do I need to preorder from here?

No, but you can just contact the thread owner 😉

DM sent to owner of this thread 😀

I have some spare, fully assembled adapters available if anyone is interested?

I did a minimum order of PCBs so thought I may as well build them all up. USB C Pro Micro.

Selling for BOM cost plus postage plus a beer for my solder and time .

3 available, 1st come 1st served.

Contact me on [insert email]

This goes into the no marketplace rule, so some posts are removed.

VOGONS is no marketplace!

Lostdotfish: I understand you're selling an assembled community project for the cost of BOM and beer, but we have to put the line somewhere. I'd accept if you mentioned in your post you had a small surplus and to contact you outside the forum for details, but making bumps and everything is too far.

Your post is way border-line on the rule, so this should not be seen as a set policy on VOGONS going forward.