VOGONS

IBM Aptiva Stealth Monitor Mount

Topic actions

First post, by nscali

Posted on 
User metadata
Rank Newbie
Rank
Newbie

Recently acquired an IBM Aptiva Stealth 7095 monitor. It has a unique stand that makes it compatible with the Stealth remote media center, and as far as I know there are zero close up pics of just the stand online. So here they are.

If there is any interest in me measuring or 3d scanning this part let me know!

The attachment 20240803_093610.jpg is no longer available
The attachment 20240805_103350.jpg is no longer available
The attachment 20240805_103442.jpg is no longer available
The attachment 20240805_103501.jpg is no longer available

Reply 1 of 4, by jkylerich

Posted on 
User metadata
Rank Newbie
Rank
Newbie

I would greatly be interested in any measurements or 3D scans of the stand. I'm looking to build me a Aptiva 2159 like I used to use back in the 90's. Monitors and stands seem to be unobtanium, but I'm not above trying to fabricate something.

Reply 2 of 4, by Horun

Posted on 
User metadata
Rank l33t++
Rank
l33t++

Nice and thank you !
Agree ! Even simple older CRT stands are not standard, not one fits all...many are specific.

Hate posting a reply and then have to edit it because it made no sense 😁 First computer was an IBM 3270 workstation with CGA monitor. Stuff: https://archive.org/details/@horun

Reply 3 of 4, by jkylerich

Posted on 
User metadata
Rank Newbie
Rank
Newbie

Well I pulled the trigger on a monitor with a stand, so maybe I can get the stand scanned for others.

Reply 4 of 4, by jkylerich

Posted on 
User metadata
Rank Newbie
Rank
Newbie

The CRT and stand arrived in good condition. I know a few members of our local group has a 3D scanner, so I'll see if I can get a scan done.

Go to top of page Go to top of page
Back to General Old Hardware
Close window
Close window