First post, by bionicsa
I've posted a few threads, and also some questions on others threads, but i though id bring it all together on my own thread, to show what i've tried, and eventually (hopefully) what the fix was.
Symptoms
When powering on the unit, the power an on light show, but there's a black screen (image A1)
When powering on the unit holding F12, i get a message about updating BIOS (image A2)
Internal Investigation
I opened the unit up and I could see the backup battery had leaked (image A3)
I cleaned the unit using vinegar, then washed it of with isopropyl alcohol. At this point i could see three points of possible damage on the board (image A4)
I replaced the backup battery with https://www.amazon.co.uk/dp/B09217RQZT?ref_=p … ed_asin_title_8 (image A5)
Attempting to get it working
I haven't made any repairs to the board as of yet.
When powering on normally (i.e. no buttons pressed) the two lights come on and i can hear the HDD spin up, but the screen is blank.
Putting the HDD into my PC, it looks to work fine, i can see all the files on it.
I had a 40GB HDD which i partitioned to 5GB, flashed a 2GB 50CT image to it from https://archive.org/details/toshiba-libretto-50ct-hdd-image, also tried an 815MB image from https://archive.org/details/toshiba-libretto-50-hdd-image, but no change in behaviour.