VOGONS


Reply 280 of 293, by dr.zeissler

User metadata
Rank l33t
Rank
l33t

Was there already a suggestion for supporting matrox-cards that never got a win9x driver-release.
I am thinking about the parhelia series cards that came in PCI/AGP/PCIe. e.g. P650 passiv-AGP.
A very nice card for retro-gaming. I think the core is DX8 compatible.

Retro-Gamer 😀 ...on different machines

Reply 281 of 293, by mwdmeyer

User metadata
Rank Oldbie
Rank
Oldbie
dr.zeissler wrote on Yesterday, 09:09:

Was there already a suggestion for supporting matrox-cards that never got a win9x driver-release.
I am thinking about the parhelia series cards that came in PCI/AGP/PCIe. e.g. P650 passiv-AGP.
A very nice card for retro-gaming. I think the core is DX8 compatible.

Yeah, I've purchase a P750 so plan to do in future, happy for anyone else to add in support to in the repo as well, the tools are setup for easy dev with AI.

I've got a Radeon R7 250 which I am going to do next, but the geforce 210 still has issues so doing another release first (and still needs work!).

Vogons Wiki - http://vogonswiki.com

Reply 282 of 293, by marxveix

User metadata
Rank Oldbie
Rank
Oldbie
dr.zeissler wrote on Yesterday, 09:09:

Was there already a suggestion for supporting matrox-cards that never got a win9x driver-release.
I am thinking about the parhelia series cards that came in PCI/AGP/PCIe. e.g. P650 passiv-AGP.
A very nice card for retro-gaming. I think the core is DX8 compatible.

p650 and p690 should be similar or not? Matrox P690

Best ATi Rage3 drivers for 3DCIF / Direct3D / OpenGL / GLUT / DVD : ATi RagePro drivers and software
33+MiniGL / OpenGL Win 9x dll files for all ATi-Rage3 based cards : ATi RagePro OpenGL files

Reply 283 of 293, by myne

User metadata
Rank l33t
Rank
l33t
mwdmeyer wrote on Yesterday, 09:17:
dr.zeissler wrote on Yesterday, 09:09:

Was there already a suggestion for supporting matrox-cards that never got a win9x driver-release.
I am thinking about the parhelia series cards that came in PCI/AGP/PCIe. e.g. P650 passiv-AGP.
A very nice card for retro-gaming. I think the core is DX8 compatible.

Yeah, I've purchase a P750 so plan to do in future, happy for anyone else to add in support to in the repo as well, the tools are setup for easy dev with AI.

I've got a Radeon R7 250 which I am going to do next, but the geforce 210 still has issues so doing another release first (and still needs work!).

R7 250 should be basically the same as the R7E shouldn't it?

I built:
Convert old ASUS ASC boardviews to KICAD PCB!
Re: A comprehensive guide to install and play MechWarrior 2 on new versions on Windows.
Dos+Windows 3.11+tcp+vbe_svga auto-install iso template
Script to backup Win9x\ME drivers from a working install
Re: The thing no one asked for: KICAD 440bx reference schematic

Reply 284 of 293, by mwdmeyer

User metadata
Rank Oldbie
Rank
Oldbie
myne wrote on Yesterday, 10:10:
mwdmeyer wrote on Yesterday, 09:17:
dr.zeissler wrote on Yesterday, 09:09:

Was there already a suggestion for supporting matrox-cards that never got a win9x driver-release.
I am thinking about the parhelia series cards that came in PCI/AGP/PCIe. e.g. P650 passiv-AGP.
A very nice card for retro-gaming. I think the core is DX8 compatible.

Yeah, I've purchase a P750 so plan to do in future, happy for anyone else to add in support to in the repo as well, the tools are setup for easy dev with AI.

I've got a Radeon R7 250 which I am going to do next, but the geforce 210 still has issues so doing another release first (and still needs work!).

R7 250 should be basically the same as the R7E shouldn't it?

For 2D Side:

  • Engine type: Oland (R7 250) runs under Carrizo’s (GCN 3), with one identity bit that switches it to SI’s DMA ring and packets.
  • DMA packets: SI’s DMA engine is Evergreen’s block, so the packet layouts come from the Cedar, Caicos and Trinity work.
  • Flips: display controller 6 keeps Evergreen’s register offsets, so the existing Evergreen flip code worked unchanged.
  • 16-bit row: copied from the Mullins (GCN 2/R3E) pattern, including moving code to a second segment to fit the space limit.
  • Register probe: V9XSIMM is a copy of the Mullins probe, V9XCKMM, with SI’s registers.

For 3d:

  • Command processor: vi_cp.c in its Mullins (R3E) mode, which already loads PFP/ME/CE microcode and runs a ring test.
  • Shaders: the GCN 2 shader encoder. GCN 1 encodes nearly the same instructions.
  • Direct3D: GCN Direct3D layer Carrizo and Mullins run on.

Vogons Wiki - http://vogonswiki.com

Reply 285 of 293, by linuxhippy

User metadata
Rank Newbie
Rank
Newbie
mr.cat wrote on 2026-09-14, 12:07:
You prompted it and poof, code came to existence? Versus, you wrote the driver yourself and used AI only for bughunting and such […]
Show full quote
myne wrote on 2026-09-14, 06:31:

I'm surprised there's not more excitement here.

You prompted it and poof, code came to existence?
Versus, you wrote the driver yourself and used AI only for bughunting and such.
Big difference.

In which regard? I imagine the value of software (not just obscure legacy-support-software) will decrease in general, regardless of something is "hand-witten" or purely prompted.

Reply 286 of 293, by dr.zeissler

User metadata
Rank l33t
Rank
l33t

It's a big difference if there is a proof of concept or a reliable pice of software that is quality fixed. I don't know if in this case AI is first or last.
I used a AI port for Halo that uses a copy of my original xbox-game on Mac. It runs great with only some bugs....but the ram demand increases with playtime. It starts with 2GB RAM and after half an hour it consumes 100GB which means hardly swapping on the ssd. In short, it runs. But I if the developer releases a quality fixed decomp/recomp I will buy that for sure.

Retro-Gamer 😀 ...on different machines

Reply 287 of 293, by 360alaska2

User metadata
Rank Newbie
Rank
Newbie

I have a suggestion for your project, suppose we vibecode/build a pxe boot image with remote control for the purpose of testing and reverse engineering graphics engines, linux based, ssh graphics commands just to test the math on an open ended engine. We usually have some idea of how the commands go be reverse engineering an existing driver, but it can take many tries and many tokens to full recreate.

Reply 288 of 293, by mwdmeyer

User metadata
Rank Oldbie
Rank
Oldbie
360alaska2 wrote on Today, 04:17:

I have a suggestion for your project, suppose we vibecode/build a pxe boot image with remote control for the purpose of testing and reverse engineering graphics engines, linux based, ssh graphics commands just to test the math on an open ended engine. We usually have some idea of how the commands go be reverse engineering an existing driver, but it can take many tries and many tokens to full recreate.

Yeah I built a linux probe already with similar thing, but most of the work can be built using Linux driver source code and Windows 98/DirectX is very specific with how it works, so that is why I created https://github.com/michaeldale/V9x-Remote-Agent to let AI drive the Win98 machine directly.

If you're interested to get involved let me know, I can help you get setup.

Vogons Wiki - http://vogonswiki.com

Reply 289 of 293, by LordMMX

User metadata
Rank Newbie
Rank
Newbie

great thing would be if it becomes AIO driver for graphics with autoupdate feature, as my Calmira does - when you have it installed and new version comes out and you download it and install it, it will kill the process, update and restart the process.

Reply 290 of 293, by mwdmeyer

User metadata
Rank Oldbie
Rank
Oldbie
LordMMX wrote on Today, 08:53:

great thing would be if it becomes AIO driver for graphics with autoupdate feature, as my Calmira does - when you have it installed and new version comes out and you download it and install it, it will kill the process, update and restart the process.

There is already online update from control panel, I think windows 98 will still require reboot. For some functions e.g OpenGL just those files can get updated with out reboot, but I don't have that setup yet.

Vogons Wiki - http://vogonswiki.com

Reply 291 of 293, by llm

User metadata
Rank Member
Rank
Member

idea:

would be nice to have some sort of test-tool in the driver settings (or as command line tool)
that compares the additional dlls (like Glide and 3DCIF DLLs - the ones that maybe needs to be replaced in/removed from game folders) with the versions that is working or released with the current driver
to prevent problems/make it easier to update
something silly with search a given path (recursive) and give the version information (and a red flag beside if update is needed) or even a feature to replace the dlls, maybe with a mini user-maintained list of relevant game folders

Reply 292 of 293, by MoneySquirrel

User metadata
Rank Newbie
Rank
Newbie

I have a Dell D600 laptop that has a Mobility Radeon 9000 with Windows ME installed. Is that something of interest? Do you plan on supporting laptop cards?

Reply 293 of 293, by myne

User metadata
Rank l33t
Rank
l33t

Laptop cards aren't special.
They're normal chips that happened to be binned to meet power, and marketing requirements.

I built:
Convert old ASUS ASC boardviews to KICAD PCB!
Re: A comprehensive guide to install and play MechWarrior 2 on new versions on Windows.
Dos+Windows 3.11+tcp+vbe_svga auto-install iso template
Script to backup Win9x\ME drivers from a working install
Re: The thing no one asked for: KICAD 440bx reference schematic