VOGONS


Exploring the performance of the Matrox G550

Topic actions

Reply 100 of 106, by vvbee

User metadata
Rank Oldbie
Rank
Oldbie

The question of hardware T&L is resurrected. The answer is, the G550 does appear to have functional hardware T&L for DX7 and DX8 (not OpenGL), starting sometime around driver 6.7x. It can be exposed in 6.83 by changing g550dd32.dll's bytes 0xeac1 (DX7) and 0x59f11 (DX8) from 74 to eb.

The attachment g550hwtnl.gif is no longer available

Based on brief testing, it appears to work generally speaking, but some types of polygons have issues. Game 1 in 3DMark2000 for example has glitched terrain while game 2 renders with few to no glitches. On a P4 2.4 GHz test machine hardware T&L loses a bunch of performance, around 50% in 3DMark2000. In Evolva hardware T&L gets around 27 FPS while software T&L hits the vsync limit at 60. I don't know whether this T&L would be of use on a slower CPU, maybe.

Even though hardware T&L isn't exposed by default, apparently fog is always computed by the on-board T&L engine, unlike on the G400 which doesn't appear to have any. Says Claude's analysis.

Reply 101 of 106, by The Serpent Rider

User metadata
Rank l33t++
Rank
l33t++

apparently fog is always computed by the on-board T&L engine

Doesn't seem to be right, unless applied to OpenGL.

I must be some kind of standard: the anonymous gangbanger of the 21st century.

Reply 102 of 106, by vvbee

User metadata
Rank Oldbie
Rank
Oldbie

It seems very right since that's what the driver appears to get up to. If you can show otherwise then please do.

Reply 103 of 106, by The Serpent Rider

User metadata
Rank l33t++
Rank
l33t++

It straight up ignores software T&L D3D option?

I must be some kind of standard: the anonymous gangbanger of the 21st century.

Reply 104 of 106, by vvbee

User metadata
Rank Oldbie
Rank
Oldbie

There's no T&L pre-DX7 so yes. But also there's no specific DX option to compute fog by the driver on the CPU that I'm aware of. I'm talking about table fog by the way.

Reply 105 of 106, by dr.zeissler

User metadata
Rank l33t
Rank
l33t

If you are comparing G400 to G450 / G550 these things came to my mind.

- Older Games benefit more from the 128Bit memory interface of the G400 than the DDR-Ram of the later cards (450/550) with 64Bit interface
- G450 does support EMBM in Expendable by RAGE, G550 does not work.
- G450/550 both lack VSYNC in OpenGL mode that is essentiel for lot's of the remakes of classic intro's and cracktros of the 16Bit area (Atari/Amiga)
- G450 has a working Win3x driver for WinOS/2 but no native Win3x driver itself. Don't know if the G550 works too. G400 should have a native Win3x driver.

The second texture-unit of the G550 does not benefit that much in real performance. In short the G550 is mostly only 20-30% faster, but perhaps this depends on the game (engine).

Doc

Last edited by dr.zeissler on 2026-11-17, 17:31. Edited 1 time in total.

Retro-Gamer 😀 ...on different machines

Reply 106 of 106, by vvbee

User metadata
Rank Oldbie
Rank
Oldbie

Claude wrote a microcode fix for the card's hardware T&L glitch that came up for example in 3DMark2000's terrain. Very cool. Fairly involved too, I think near zero chance this would ever have been fixed by hand.

The attachment 3dm2kcmcf.jpg is no longer available

I can still see an occasional issue, but starting to look like proper full hw T&L on this card. Needs to be tested on a slow CPU though to see what the actual value is.