Around 10 years ago I picked up a whole bunch of brand new cleaning kits (disk + bottle of fluid) that said they were for LS-120 drives, but I just used them to clean normal floppies.
One day a year or two ago, I was trying to read a disk in my original LS-120 drive (came with my Gateway G6-400 in 1999) and it wasn't working well. So, I broke out one of the LS-120 cleaning disks, popped it in, anddd... it instantly destroyed the drive. It seems that LS-120 drives have too much going on in them to just drop in a fuzzy\abrasive cleaning disk. It seems like it snagged on one of the heads and just totally mangled it. I was really bummed because this was always my most reliable LS-120 drive and that system is otherwise still basically original (same hard drive, PSU, motherboard, etc.) after almost 28 years.
In other words... if any cleaning disks advertise LS-120\LS-240 usage, I would not believe them. If there is a way to reliably clean an LS-120 head, an old-school head-cleaning floppy is not it.
I still have some of them around, thought the plastic packages that contained each disk+fluid kit disintegrated in storage for some reason. I will see if I can dig up a picture of the kits in themselves because the loose disks don't really look like much and don't even have a brand on them. It's just a blue floppy with a fabric disk inside it, no metal dust shield, and a generic looking white label that says "For LS-120" and "SuperDisk Cleaner", plus some basic instructions about replacing it when it gets worn.
Now for some blitting from the back buffer.