First post, by Shodan486
This particular mobo has its J26 I think, positions from 1 to 4, whereby the position 3-4 cannot be set due to missing pins = thus cannot set 512KB cache option, though there is a printed table of values on the PCB. Do you think by soldering these two joints I could possibly get what i want?
We can see multiple missing jumper pads, but I only miss 2 in the very left side, where the jumper is set over the existing position 2 and non-existing position 3.
The stason link just for sure http://www.lejabeach.com/Biostar/MB-8Series/MB-8433UUC.htm
Also if we have a empty place for a PC buzzer, can I add one on it with functioning results?
MOBO: PVI-486SP3 Rev 1.2
CPU: POD-83
RAM: 2x16MB
VIDEO: Matrox Millenium 2MB/Voodoo2 12MB/Video Blaster VT300
AUDIO: SB Vibra16 FM
SCSI: 72GB 15k RPM HDD/YAMAHA CD-RW 16x/ZIP drive + FDD drive
NIC: 3Com Etherlink III
PSU: 230W Generic
OS: Win95 OSR2.5